Front brake problem? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Front brake problem? |
GaroldShaffer |
Aug 27 2006, 11:04 AM
Post
#1
|
You bought another 914? Group: Benefactors Posts: 7,627 Joined: 27-June 03 From: Portage, IN Member No.: 865 Region Association: None |
Question about front brakes. I ran our local AX on the 20th, on my 4th (of 6 runs) when I came in to grid it sounded like I had a rock stuck between the dust cover and rotor. I did the back up hit brake trick a few times and it still made that sound. It was coming from the passenger side front. I quickly jacked up the car and pulled the wheel. I didn't find any stones, I turned the rotor by hand and didn't here any noise. I put the tire back on and continued to race and all was good. On the way home I started to hear the "rubbing sound" sound again, but it would stop if a lightly tap the brakes.
I finally have time today to look at this. With the front wheel on or off it sounds like metal rubbing the rotor when I spin the wheel / rotor. It seems to me that pads are making contact with the rotor, but I need to check the venting clearance. I have never messed with brakes before, what should I be looking for? I'm heading off to sears to get a fueller (sp) guage, dial caliper and micrometer. A man gotta have tools for the job. (IMG:style_emoticons/default/rolleyes.gif) (IMG:style_emoticons/default/smash.gif) |
Brando |
Aug 27 2006, 01:29 PM
Post
#2
|
BUY MY SPARE KIDNEY!!! Group: Members Posts: 3,935 Joined: 29-August 04 From: Santa Ana, CA Member No.: 2,648 Region Association: Southern California |
Another way a wheel bearing issue might present itself is when turning slightly left and/or right, you may hear a whine or grinding/metal-on-metal rubbing. Try going in a straight line and start with very small incremental turning of the wheel. I would try at varying speeds as well.
If you're going to pull the wheel for a bearing replacement, might as well check the pads. I believe headrage a year or so ago had a question about an intermittent grinding/rubbing noise, we found that the pad material separated from the backing. That was a fun afternoon in San Pedro (IMG:style_emoticons/default/smile.gif) |
Lo-Fi Version | Time is now: 27th September 2024 - 10:35 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |