914 with 911 Front end- Which Strut inserts? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914 with 911 Front end- Which Strut inserts? |
Jeff Hail |
Aug 27 2007, 01:05 AM
Post
#1
|
Senior Member Group: Members Posts: 1,141 Joined: 3-May 07 From: LA/ CA Member No.: 7,712 |
Have a question that I have not seen posted yet....
914 with a 1988 Carerra front end (Boge struts, bigger brakes and control arms with underbody sway bar. Popular upgrade for a 5 lug. Question: What inserts would be the correct pick for the front? 911 or 914? I am going with Koni adjutables and all the manufacturers Bilstein, Koni, Boge have different part numbers for the inserts for the 911 and 914 because of different valving. Anything else I should be aware of? Any problem using the new replacement 914 inserts in the Carerra/ Boge strut tubes? Are the tube dimensions the same. All I can see visually that is different is the crown nut securing the insert. Should I just order the 914 strut inserts for Boge tubes and go? |
Eric_Shea |
Aug 27 2007, 05:05 PM
Post
#2
|
PMB Performance Group: Admin Posts: 19,289 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
Hi Jeff:
(IMG:style_emoticons/default/welcome.png) I don't believe there are "any" inserts for that strut that are "officially" for the 914. You could get Koni and Bilsteins revalved for the application (if you deemed it worthwhile). As stated in that link, there's not too much difference between the 911 and the 914 version of the Koni. Just high speed rebound and from what I understand, it's slight. I don't believe a 914 or early 911 Boge will fit that strut. I could be wrong though... |
Jeff Hail |
Aug 27 2007, 05:38 PM
Post
#3
|
Senior Member Group: Members Posts: 1,141 Joined: 3-May 07 From: LA/ CA Member No.: 7,712 |
Hi Jeff: (IMG:style_emoticons/default/welcome.png) I don't believe there are "any" inserts for that strut that are "officially" for the 914. You could get Koni and Bilsteins revalved for the application (if you deemed it worthwhile). As stated in that link, there's not too much difference between the 911 and the 914 version of the Koni. Just high speed rebound and from what I understand, it's slight. I don't believe a 914 or early 911 Boge will fit that strut. I could be wrong though... Richard, Eric Thanks, I am going call Koni and Bilstein. They should at least be able to tell me if the inserts are dimensionally the same. I know the crown nuts on the strut tubes are different on the outside but I do not know about the inside. If I can get a clear answer from them I will post it. Thanks again, |
Lo-Fi Version | Time is now: 27th September 2024 - 06:22 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |