Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Headlight motor, electrical problem?
EJP914
post Feb 28 2010, 07:15 PM
Post #1


Member
**

Group: Members
Posts: 262
Joined: 14-June 03
From: Monroeville, PA
Member No.: 821



I am reinstalling the headlights, brackets, pivots, etc after having the car repainted. All works well on the RH side. Headlight lights up and it opens and closes. On the LH side the headlight lights up in the closed position. It will not open and close. I have replaced the relay with one I know is good. The ground wire is tight. No blown fuses in the fuse panel. The nut that holds the lever to the splined post on the motor seems tight enough. If I manually turn the black knob at the back of the motor, the light will cycle open and then close.
Electrical problem somewhere?
What do the 3 wires do that plug into the 3 wire plug coming from the motor?
Red = power? Does this wire give power to the motor AND the headlight?
Green???
Gray???
I thought headlight motors were pretty much bulletproof, last forever. Maybe not.
If anyone has a suggestion on how to attack this problem and what I should look at first, please let me know. . Thanks in advance for the advice.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 26th September 2024 - 09:57 PM