Rear Pickup Points Reinforcing Kit, Tangerine Racing?? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Rear Pickup Points Reinforcing Kit, Tangerine Racing?? |
EdArango |
Jan 4 2012, 12:42 AM
Post
#1
|
914 Enthusiast Group: Members Posts: 267 Joined: 30-January 10 From: Huntington Beach, CA Member No.: 11,309 Region Association: Southern California |
Hi Everyone,
So I would like to install some rear pickup point reinforcement ........ Is Tangerine Racing the only vendor that sells these???? http://www.tangerineracing.com/chassis.htm Is there someone else that produces this at a more reasonable price?? Please let me know ! Thanks Ed |
AndyB |
Jan 4 2012, 10:56 AM
Post
#2
|
The Governor is watching me Group: Members Posts: 1,115 Joined: 10-April 10 From: Philadelphia New York Member No.: 11,595 Region Association: North East States |
IIRC CFR/Tangerine Racing were the fabricators of these particular parts. Yes good work costs money. The F in CFR stands for Fabrication. These parts for our beloved money pits are not off the shelf avaiable. So sometimes you actually need to pony up the funds. I bought an exhaust from CFR that will out live my car. I don't have any regrets on it at all. Yep could of gone the cheap route but did it once and am done with it. Sometimes you have to look at the process not just the price tag. This is just MHO
|
J P Stein |
Jan 4 2012, 11:12 AM
Post
#3
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Sadly no.
I did my own.....cheep but labor intensive. As Red Green says (paraphrased) "If you aren't rich & handsome, you'd better be handy". Attached image(s) |
Beach914 |
Jan 4 2012, 11:43 AM
Post
#4
|
Senior Member Group: Members Posts: 974 Joined: 28-March 10 From: Aliso Viejo Member No.: 11,519 Region Association: Southern California |
Ed, Looking at the great pics, we can prefab some of those at my house if you want. we could use my car as for the dimensions.
I've got some scrap pieces of tube and plate at my company that we can use. Your call on this... Dave |
moggy |
Jan 4 2012, 01:17 PM
Post
#5
|
Member Group: Members Posts: 192 Joined: 15-December 04 From: Wales Member No.: 3,285 |
Hi Everyone, So I would like to install some rear pickup point reinforcement ........ Is Tangerine Racing the only vendor that sells these???? http://www.tangerineracing.com/chassis.htm Is there someone else that produces this at a more reasonable price?? Please let me know ! Thanks Ed The kit and the inner ear strengthening is what I bought from CFR. I can certainly vouch for the quality of the components, spot on (IMG:style_emoticons/default/aktion035.gif) I can also confirm that they will put up with some SERIOUS abuse and won't let you down. I've probably put them to the destruction test more than most (IMG:style_emoticons/default/happy11.gif) Here's mine getting installed: (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_034.jpg) (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_043.jpg) (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_044.jpg) (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_039.jpg) (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_040.jpg) (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_041.jpg) I'd also suggest if you're doing this you strengthen the longs, like I've done. (IMG:http://i31.photobucket.com/albums/c395/odg743g/IMAGE_038.jpg) I have to ask.... why do you think you need the above? do you race? or have a V8 or some other powerful motor in there? I'm assuming you've already strengthed the rear arms? Hope this helps (IMG:style_emoticons/default/beerchug.gif) |
EdArango |
Jan 4 2012, 01:37 PM
Post
#6
|
914 Enthusiast Group: Members Posts: 267 Joined: 30-January 10 From: Huntington Beach, CA Member No.: 11,309 Region Association: Southern California |
Ed, Looking at the great pics, we can prefab some of those at my house if you want. we could use my car as for the dimensions. I've got some scrap pieces of tube and plate at my company that we can use. Your call on this... Dave Hey Dave!!! I tried calling you over the holidays but no answer. That sounds like a plan!! We should be able to make the parts up ourselves. I'll call you later this week!! ED |
EdArango |
Jan 4 2012, 01:58 PM
Post
#7
|
914 Enthusiast Group: Members Posts: 267 Joined: 30-January 10 From: Huntington Beach, CA Member No.: 11,309 Region Association: Southern California |
Hi Everyone, So I would like to install some rear pickup point reinforcement ........ Is Tangerine Racing the only vendor that sells these???? http://www.tangerineracing.com/chassis.htm Is there someone else that produces this at a more reasonable price?? Please let me know ! Thanks Ed The kit and the inner ear strengthening is what I bought from CFR. I can certainly vouch for the quality of the components, spot on (IMG:style_emoticons/default/aktion035.gif) I can also confirm that they will put up with some SERIOUS abuse and won't let you down. I've probably put them to the destruction test more than most (IMG:style_emoticons/default/happy11.gif) Here's mine getting installed: I'd also suggest if you're doing this you strengthen the longs, like I've done. I have to ask.... why do you think you need the above? do you race? or have a V8 or some other powerful motor in there? I'm assuming you've already strengthed the rear arms? Hope this helps (IMG:style_emoticons/default/beerchug.gif) Hey Moggy!! My plan is to go with a 3.2 or bigger engine and plan to do some A/X with the car and since I'm already in here doing this work thought it would be a good time to do it> ED |
J P Stein |
Jan 4 2012, 02:43 PM
Post
#8
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
One can see the differences in philosophy between the 2 supports. I wanted more lateral support for the ear which was needed for my large rear tires and still works for fore & aft support.
Attached image(s) |
yeahmag |
Jan 4 2012, 06:46 PM
Post
#9
|
Advanced Member Group: Members Posts: 2,435 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California |
Is this kind of bracing needed for 205-50-15 DOT-R's or am I not to that point of adhesion yet?
|
Larouex |
Jan 4 2012, 06:53 PM
Post
#10
|
Larouex Group: Members Posts: 144 Joined: 22-July 08 From: Larouex@gmail.com Member No.: 9,339 Region Association: Pacific Northwest |
Seriously, 400 bucks and you are squaking about the kit being reasonable? The people building products for our cars deserve to be supported and you should purchase from them, not replicate their hard work and lift from the pictures on this forum.
Larouex |
0396 |
Jan 4 2012, 07:01 PM
Post
#11
|
Advanced Member Group: Members Posts: 2,046 Joined: 13-October 03 From: L.A. Calif Member No.: 1,245 Region Association: Southern California |
Seriously, 400 bucks and you are squaking about the kit being reasonable? The people building products for our cars deserve to be supported and you should purchase from them, not replicate their hard work and lift from the pictures on this forum. Larouex Could have not said it any better |
J P Stein |
Jan 4 2012, 09:47 PM
Post
#12
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Is this kind of bracing needed for 205-50-15 DOT-R's or am I not to that point of adhesion yet? It depends. I've seen ripped off inner ears from stock a car with 205s....and that was more than 10 years ago and a CA car. If you have one of them blown out spot welds at a bad spot or interior rust on the ear bad things can happen. It is just another spot to pay extra attention to. We've seen several here at World over the years. BTW, 400 bucks was 2 front tires at the time. I should worry about someone trying to make money off my hobby?....not bloody likely. Maybe 40 bucks and my free time to make what *I want* not what someone thinks I should want? Get real. |
Chris Hamilton |
Jan 5 2012, 02:50 AM
Post
#13
|
Senior Member Group: Members Posts: 611 Joined: 7-March 06 From: Berkeley, CA Member No.: 5,687 |
Seriously, 400 bucks and you are squaking about the kit being reasonable? The people building products for our cars deserve to be supported and you should purchase from them, not replicate their hard work and lift from the pictures on this forum. Larouex What I think is unreasonable is pushing someone to buy a kit they do not want simply as charity for member vendors. They'll be just fine without this kind of help. People have been doing this reinforcement to 914s since long before this kit was ever produced ( most of the ones I've seen didn't use heim joints though? ) When it comes to this particular job, I'll make the part right here in my garage out of material I already have. It sounds to me like the original poster is going to do exactly that. |
sixnotfour |
Jan 5 2012, 03:50 AM
Post
#14
|
914 Wizard Group: Members Posts: 10,525 Joined: 12-September 04 From: Life Elevated..planet UT. Member No.: 2,744 Region Association: Rocky Mountains |
It boils down to "whats your time worth" and :
budget timeline I did it myself (fabbed it and installed it) I installed it (purchased kit) How many Buddy's does it take to install a reinforcing kit (purchased kit) ? How many Buddy's tools /materials/time to install a reinforcing kit. ? At some point during all this I may have just wasted $400 responding to this. The fixed kit/non heim kit is $280 2012 Jeff |
bulitt |
Jan 5 2012, 04:33 AM
Post
#15
|
Achtzylinder Group: Members Posts: 4,188 Joined: 2-October 11 Member No.: 13,632 Region Association: South East States |
I don't quite get the heim joint in this location? Is it to allow for some movement or the fact that it allows the kit to be mounted on "every" car due to non consistent tolerances? Beautiful looking kit but In my humble opinion if I'm going to be down there doing all the welding than why not a straight tube?
|
mepstein |
Jan 5 2012, 05:30 AM
Post
#16
|
914-6 GT in waiting Group: Members Posts: 19,518 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region |
I don't quite get the heim joint in this location? Is it to allow for some movement or the fact that it allows the kit to be mounted on "every" car due to non consistent tolerances? Beautiful looking kit but In my humble opinion if I'm going to be down there doing all the welding than why not a straight tube? Clearance - Makes it possible to remove the bar and drop the engine. Might or might not need it for your combination. Chris Folley never said you have to buy his products but they are sure nice if you want a pre tested ready to go solution that you know will fit and work. Seems very reasonably priced. |
brant |
Jan 5 2012, 09:20 AM
Post
#17
|
914 Wizard Group: Members Posts: 11,739 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains |
Mine are heim jointed also
bolt in allows them to be easily pulled for motor drops you can triangulate inboard with bolt in (which blocks the tin work on a 4 cylinder) I have 1 set in my 4 cylinder car which were installed around 1990 after I ripped my suspension console out for the 2nd time on a track only car running 205 tires. I have another set in my -6 I have a 914 fab shop here locally that builds these for all of its cars. I helped install and it was really nice to have something that fit perfectly and was tweeked and designed to fit simply. I would recommend anyone tracking a car to check the outer swingarm pivot bolt (22mm) regularly. when they come loose not only do they oval the ear, but they contribute to ripping the console out. I used to have to tighten mine on a daily basis prior to the bars being installed in 1990-ish. have never had to tighten them since. I'd suggest checking this bolt because if it is working loose then it is a sign that you definitely need the brace. picture of mine are in my vintage thread in my signature brant |
Eric_Shea |
Jan 5 2012, 09:42 AM
Post
#18
|
PMB Performance Group: Admin Posts: 19,289 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
I always thought the CFR kit was reasonable.
|
J P Stein |
Jan 5 2012, 11:18 AM
Post
#19
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Brant
I never had a lick of problems with the outer mounting point ear. Toe settings lasted a season as set.....checked alignment at the start of the season ...most years. If you use a Heim joint, the bolts need to be "fitted" within the joint itself and to the mounting holes on the chassis (that makes for a 0 slop joint). If not, one can take out the slop in by pre-loading but only in one direction of thrust, not both. Welding is a 0 slop joint, however, the area that one typically attaches the inner ear bar to is 16- 20 gauge sheet metal (Moggy did a better job there than most I've seen). A very large backing plate to prevent "oil canning" the area. I believe in overkill....one of my many character flaws. (IMG:style_emoticons/default/biggrin.gif) |
J P Stein |
Jan 5 2012, 11:44 AM
Post
#20
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Jeff:
I did borrow a welder....but bought my own gas & wire. (IMG:style_emoticons/default/biggrin.gif) Brit helped do the deed but I'd have done it all myself with an added time element. I was a builder...the hobby part.....and also cause my driving sucked. BTW. For those that actually looked at my pics, you'll notice an extra chunk of sheet metal stuck on to the ear in the first pic. It is there because the outer section's upset is proud of the periphery.....oops. Had I known this before digging in there I would have left the sheet metal of the inner section on there & cut around (inside) it......shit happens & you replace it. (IMG:style_emoticons/default/confused24.gif) The replacement piece is 3/16" thick. I had a longer than stock thread on swing arm pivot so this was no problem. With the shorter stock pivot you'll run out of thread for the bolt using using a thick replacement plate. |
Lo-Fi Version | Time is now: 27th September 2024 - 08:54 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |