Awesome Autocrossing Sunday, 1st place amongst 3 teeners |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Awesome Autocrossing Sunday, 1st place amongst 3 teeners |
Joe Ricard |
May 22 2005, 08:19 PM
Post
#1
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Went to the Jackson Mississippi Region SCCA today. 186 miles one way. Just to AX my car.
Met up with CharlesMac. He co-drove my car and did an awesome job. After I told him to STAND ON THAT SUCKER. He got within .030 sec from me. 12 runs total for my car and never missed a beat all the way home. Then there was the Raby powered flared car. If you really wanna know the results times will be posted around Tuesday. But someone got their ass kicked. (IMG:http://www.914world.com/bbs2/html/emoticons/chair.gif) |
tat2dphreak |
May 22 2005, 08:44 PM
Post
#2
|
stoya, stoya, stoya Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) kick ass dude!! that's great! (IMG:http://www.914world.com/bbs2/html/emoticons/pray.gif)
get any pics? |
tommy914 |
May 22 2005, 10:07 PM
Post
#3
|
Life is a journey, enjoy every turn. Group: Members Posts: 1,103 Joined: 15-September 03 From: Ridgeland, MS Member No.: 1,165 Region Association: None |
Good job Joe!
next time you come up this way, give me a shout. By the way, was the Raby powered 914 local? Tommy |
Joe Ricard |
May 23 2005, 05:00 AM
Post
#4
|
||
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
You bet, The next event there will be in a few months. The guys said somethig about making it a night event (IMG:http://www.914world.com/bbs2/html/emoticons/driving.gif) Perfect for racing and then drinking beer afterwards. (IMG:http://www.914world.com/bbs2/html/emoticons/mueba.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) Yea the white Raby powered car was from Hattiesburg. With a big cloud of black smoke from the pipes he was on his way. If he was running webers I coulda hooked him up with some smaller jets. He was running 45 Dells and I didn't want to guess. Does that explain the cool head temps? I'm certain there was more power to be had by leaning it up a few steps. |
||
charlesmac |
May 23 2005, 07:51 AM
Post
#5
|
Member Group: Members Posts: 210 Joined: 27-June 04 From: Richland, MS Member No.: 2,264 |
Joe, thanks again for letting me drive your car yesterday. my 1st A/X ever, and i'm hooked. MAN WHAT A BLAST! I definately have some motivation for getting mine put together. It had been probably at least 6 years since i drove a teener, but mine didn't handle like Joe's, and i never had the chance to drive mine like that. I love to see 30 something year old 914's beating up on new "modern" technology. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
Jake Raby |
May 23 2005, 08:03 AM
Post
#6
|
Engine Surgeon Group: Members Posts: 9,398 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
The RAT powered car was probably sporting one of my engine kits- I don't have anyone in that area on my map with a complete engine, unless he bought it second hand... If its the guy that has the engine kit I would bet its his first Auto X and with that kind of power he probably had a serious learning curve and not enough rubber on the ground.
Did you get his name? |
mharrison |
May 23 2005, 08:12 AM
Post
#7
|
Why do I bother???? Group: Members Posts: 633 Joined: 8-September 03 From: Madison, MS Member No.: 1,123 |
I drove by on my way to work. I was pretty sad seeing those teeners (and everyone else) running while I was working. (IMG:http://www.914world.com/bbs2/html/emoticons/mad.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) I was wondering if you guys were on this board!
|
charlesmac |
May 23 2005, 08:16 AM
Post
#8
|
Member Group: Members Posts: 210 Joined: 27-June 04 From: Richland, MS Member No.: 2,264 |
Jake, the guy's name was Frank, didn't catch his last name, he did say it was one of your kits though.
|
Jake Raby |
May 23 2005, 08:22 AM
Post
#9
|
Engine Surgeon Group: Members Posts: 9,398 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
Fred perhaps?? Fred Herst is the guy I'm thinking about with the kit.
I have a pretty good idea of where all my stuff is at and who has it... Charles, I have your cylinders and pistons boxed up, I just keep forgetting to ship them! Will get that on the shipping list today- email me the address again just to make sure I have it correct. |
Joe Ricard |
May 23 2005, 08:43 AM
Post
#10
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Jake if this guy shows up again at one of the events How can I give him a hand in jetting? Not familiar with jetting Dell's I imagine it's similar to weber but actual jets are different? his motor was idling at about 1300 which kinda led me to believe he hasn't opened the magic pandoras box of carb tuning.
What is the recommended base line for your 2270 @ 500 feet sea level air temp (hotter than the hammers of hell) 90 degrees humidity 90 percent + He had (looked like) 1.8l stock HE with shrouds pulled off and didn't recognize the collector and muffler Wasn't Bursch. Hard to concentrate enough on driving my event and tweaking someone elses car. I rode with him on his 3rd run and talked him through the course shaved 5 seconds. Gave him a ride in mine right after and showed hime what 5 more seconds looked like and where the good places to hold on are. He was taking pretty fast something about "holy shit that was cool" I need some of that suspension stuff. Got the local hot shoe signed up to co drive next event. he thinks he can pull out FTD. Hmm guess I better tune it up. |
Jake Raby |
May 23 2005, 09:29 AM
Post
#11
|
Engine Surgeon Group: Members Posts: 9,398 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
Cool.. He has Webers last I knew..
For the 45s I'd say he needs a 150 main if they have a stock 38mm vent, but then he may have his float height way off and jetting won't help a bit. I have had mane Dells that needed much lower float heights for Auto X not to run rich... His engine should be good for 155 HP in good tune and 160 lb/ft of torque. |
charlesmac |
May 23 2005, 09:54 AM
Post
#12
|
Member Group: Members Posts: 210 Joined: 27-June 04 From: Richland, MS Member No.: 2,264 |
Maybe it was Fred.
e-mail sent Jake. |
hedfurst |
May 23 2005, 04:02 PM
Post
#13
|
Member Group: Members Posts: 99 Joined: 9-March 03 From: S. Mississippi Member No.: 406 |
I too had a great time sunday in jackson. Joe, thanks for the ride.
I was running an old set of rebuilt Webers but found a good deal on the Delolortos that I couldn't pass up. The 44s are going to be used on another motor. I just put the Dells on and wasn't sure about the jetting, I would appreciate any tuning advice. I will definitely be there next time. Fred Hurst |
Jake Raby |
May 23 2005, 05:24 PM
Post
#14
|
Engine Surgeon Group: Members Posts: 9,398 Joined: 31-August 03 From: Lost Member No.: 1,095 Region Association: South East States |
Fred, good to see you here.... Get that jetting sorted before you wash the cylinder walls with fuel and disturb the rings..
|
Joe Ricard |
May 23 2005, 08:28 PM
Post
#15
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Fred I am getting torn between events. Delta is much closer for me and they will be running an event the same day.
Throw the Webers back on and we can get a tune on them as I have quite an assortment of jets. It would be great if you have a wide band air fuel meter goes pretty quick that way. Other wise you are just guessing at getting it close and hoping not to burn it up or foul out the plugs. |
nebreitling |
May 23 2005, 08:38 PM
Post
#16
|
Member Emeritus Group: Members Posts: 3,314 Joined: 26-March 03 From: San Francisco Member No.: 478 |
WTG Joe -- you are an autocrossing monster! 186 miles one-way -- i like it!
|
Joe Ricard |
May 23 2005, 08:48 PM
Post
#17
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
I'll email you the results when they are posted Tueday. that makes 9 events and one school. Don't think my Kumhos will make through the summer. (2/32nd) Going to flip em this week.
But that's OK I wanna use my Hoosiers anyway (IMG:http://www.914world.com/bbs2/html/emoticons/mueba.gif) still waiting on rims. |
hedfurst |
May 24 2005, 09:45 AM
Post
#18
|
Member Group: Members Posts: 99 Joined: 9-March 03 From: S. Mississippi Member No.: 406 |
Joe, the webers are history-they've been traded- I guess I'm a Dell man now.
Where can I get one of the aformentioned air/fuel meters? Also, let me know where and how we can conclude the shock-bolt business. I've got a lot of work to do to catch up (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) |
Joe Ricard |
May 24 2005, 10:27 AM
Post
#19
|
||
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Fred I emailed you the details. |
||
charlesmac |
May 24 2005, 11:50 AM
Post
#20
|
Member Group: Members Posts: 210 Joined: 27-June 04 From: Richland, MS Member No.: 2,264 |
Fred, it was great to see another 914 in the area. Sorry you had to run and miss out on the 2nd session. I've got a good friend that has some experience with dells in jackson, I'll see what he has for jets for those. Looking forward to seeing you at the next one.
charles |
Lo-Fi Version | Time is now: 27th September 2024 - 07:04 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |