Does anyone here have the part number for the support brackets for the aluminum front cross member?

Part number for the cross member is 91134101310, but there are two auxillary support brackets that attach to the bracket and the rear front mounting bosses.

Here's the x member

http://www.autoatlanta.com/porsche-parts/h...;section=401-00

Here's the parts catalog from Porsche:

https://www.porsche.com/all/media/pdf/origi...914_KATALOG.pdf

https://www.porsche.com/usa/accessoriesands...partscatalogue/

Send Bruce a pm. I purchased a re-plated set from him last year.

930.341.031.01 for a turbo

911.341.031.02 for an SC

not sure what the difference in the two is?

Seem to remember they have a swaybar mount on them,I recall they were fairly expensive,I made a set front 6mm flatbar steel didn't take too much effort.

Thanks for the replies everyone.

The last time I installed an aluminum cross member, I cut the supports off of a 914 part, drilled and bent them to work. For $43 a pop, I'll do the same or make a pair.

Tom’s Rennshop had a pair for a good price