Anyone have a link to it?? Thanks

http://www.914world.com/bbs2/index.php?sho...column&st=0

http://www.914world.com/bbs2/index.php?showtopic=82045

http://www.914world.com/bbs2/index.php?showtopic=306961

http://www.914world.com/bbs2/index.php?showtopic=243875

http://www.914world.com/bbs2/index.php?showtopic=206113

Thanks everyone. Last thing to find is a column that isn't $350..

Last thing I need is the wiring harnesses for the switches and the ambition to do the deed.

Found a column on pelican for $95.. Yeah.

I need the harness connectors to the car.

Just looked at what I have and the turn and wiper switches do have harnesses, but are the connector plugs the same as on the 914?

I don't have the harness for the ignition switch.

Nope I am not sure how I want to tackle that yet.. The plugs are very different.

yes my version is round, not the areal version. I will most likely go with Deutsch connectors, it is already not a stock anything car so it should not be an issue. Just documentation of what goes into what ever pin.

Still interested in the conversion, and Ben's final version.

For reference here are the 3 column s far left is 74 up 911 column middle is a 914 and far right is 69-73 911 column. Click to view attachment

Excellent thread as I hope to one day do this. Thanks!
Wish I had done it when I had the chance but there was so much going on and I had a major wiring mess to contend with.

Here is the conversion for those interestedClick to view attachment Click to view attachmentClick to view attachment

I’m starting to think there’s nothing you can’t fabricate! Great work!