Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

7 Pages V  1 2 3 > »   
 Reply to this topicStart new topic
> nditiz1's mediocre 6 conversion, SOLD at auction, off to a new home
nditiz1
post Aug 11 2021, 08:31 PM
Post #1


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
Hey all - not sure if you all were aware that I have been in the middle of a conversion build since last year. Well the time finally came, or should I say a fire under my butt, to get me to push for a completion. By completion I mean a running/driving 6. Quick back story. Bought the car from a member 74 2.0. Already had glass flares, 5 lug, and an overheating engine. Dropped that out as I had a 2.7 waiting to be finished. Collected parts for the engine. Collected parts for the conversion. Sat back and waited for it to build itself, it didn't. Finally bought my tix for Okteenerfest so now I'm forced to get it done in time. I recently posted up an extensive to do list.

She won't be a show winner, but she may just get me there.

Here is the current state of affairs.

2.7 - ITB twin plug EFI
(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735514.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735515.2.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735515.3.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735515.4.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735516.5.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735516.6.jpg)

Yup! definitely grabbed the wrong hole saw 3" (should have been 2.5") smh

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735516.7.jpg)

Have to address this rust I cut out before I can mount the tank.

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628735516.8.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dion
post Aug 11 2021, 08:44 PM
Post #2


RN
****

Group: Members
Posts: 2,797
Joined: 16-September 04
From: Audubon,PA
Member No.: 2,766
Region Association: MidAtlantic Region
Nice powerplant! Good luck with the project.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mgp4591
post Aug 11 2021, 08:44 PM
Post #3


914 Guru
*****

Group: Members
Posts: 5,470
Joined: 1-August 12
From: Salt Lake City Ut
Member No.: 14,748
Region Association: Intermountain Region
Sounds like a good opportunity to use some fuel line tubing for edge protection and visual bling. Some may use other material for bling but it's bling enough for me and my build as well!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
saigon71
post Aug 12 2021, 05:37 AM
Post #4


Advanced Member
****

Group: Members
Posts: 2,006
Joined: 1-June 09
From: Dillsburg, PA
Member No.: 10,428
Region Association: MidAtlantic Region
That engine even looks fast!

I hope you are able to finish it in time Nick. (IMG:style_emoticons/default/driving.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cairo94507
post Aug 12 2021, 06:28 AM
Post #5


Michael
**********

Group: Members
Posts: 10,057
Joined: 1-November 08
From: Auburn, CA
Member No.: 9,712
Region Association: Northern California
(IMG:style_emoticons/default/popcorn[1].gif) (IMG:style_emoticons/default/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nditiz1
post Aug 12 2021, 07:29 AM
Post #6


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
Thanks Bob.

Some morning welding. It ain't pretty, but it will do. It started out so nice. I am at most just below average welder lol. If the metal is thick, I'm good. Maybe because of the MIG. What settings are you all running? It's an Eastwood 135 MIG. That's why the invented grinders right? 1 more patch panel and the welding should be done for now.

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628774980.1.jpg)

Burn through and difficult location.

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628775044.1.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Justinp71
post Aug 12 2021, 09:58 AM
Post #7


Senior Member
***

Group: Members
Posts: 1,597
Joined: 11-October 04
From: Sacramento, CA
Member No.: 2,922
Region Association: None

Nice! Whose throttle bodies are those? I just got the RHD's but have not started that project yet.

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nditiz1
post Aug 12 2021, 10:43 AM
Post #8


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
They are the old triumph triple speed ITB's.

They are/were sold through X-Factory (Al Kosmal), but I think he has now moved to the RHD.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
TRS63
post Aug 12 2021, 11:21 AM
Post #9


Member
**

Group: Members
Posts: 323
Joined: 14-September 20
From: Germany - Stuttgart
Member No.: 24,690
Region Association: Europe
What a nice engine (IMG:style_emoticons/default/wub.gif)

Antoine
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
BK911
post Aug 12 2021, 12:15 PM
Post #10


Senior Member
***

Group: Members
Posts: 672
Joined: 19-February 04
From: Rocky Top, TN
Member No.: 1,674
Region Association: None
Wow, pretty ambitious!
Lots of looooong nights ahead, but looks like she will be worth it.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nditiz1
post Aug 14 2021, 05:53 AM
Post #11


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
Trying to catch OptimusGlen (IMG:style_emoticons/default/biggrin.gif) , getting the engine closer to a startup. Today will hopefully be a productive day in getting the last bit of welding done and the tank installed.

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628942010.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628942011.2.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Optimusglen
post Aug 14 2021, 06:16 AM
Post #12


Senior Member
***

Group: Members
Posts: 921
Joined: 26-February 16
From: Minneapolis
Member No.: 19,709
Region Association: Upper MidWest
QUOTE(nditiz1 @ Aug 14 2021, 06:53 AM) *

Trying to catch OptimusGlen (IMG:style_emoticons/default/biggrin.gif) , getting the engine closer to a startup. Today will hopefully be a productive day in getting the last bit of welding done and the tank installed.

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628942010.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1628942011.2.jpg)


Haha, good luck! Make sure you connect and torque the lower hose on the tank before you install it.

Do you want a couple caps for the heater tubes too?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Spoke
post Aug 14 2021, 06:37 AM
Post #13


Jerry
*****

Group: Members
Posts: 7,079
Joined: 29-October 04
From: Allentown, PA
Member No.: 3,031
Region Association: None
Nick, the engine looks great. Good luck with the conversion.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Shivers
post Aug 14 2021, 06:47 AM
Post #14


Senior Member
****

Group: Members
Posts: 2,758
Joined: 19-October 20
From: La Quinta, CA
Member No.: 24,781
Region Association: Southern California
I hope you make your goal. The engine looks great
User is online!Profile CardPM
Go to the top of the page
+Quote Post
nditiz1
post Aug 14 2021, 07:12 AM
Post #15


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
Thanks for the encouragement all. (IMG:style_emoticons/default/beerchug.gif)

@OptimusGlen - yes please.

He is sending me some block off plates for my tin, some cabin caps like he just posted and the half pulley (95mm) for my fan.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mb911
post Aug 14 2021, 08:35 AM
Post #16


914 Guru
*****

Group: Members
Posts: 7,213
Joined: 2-January 09
From: Burlington wi
Member No.: 9,892
Region Association: Upper MidWest
Love to see everyone finishing up these projects. Most of us started around the same time including Brent, Glen, Dion and now Nick. Very cool
User is online!Profile CardPM
Go to the top of the page
+Quote Post
porschetub
post Aug 14 2021, 06:17 PM
Post #17


Advanced Member
****

Group: Members
Posts: 4,728
Joined: 25-July 15
From: New Zealand
Member No.: 18,995
Region Association: None
QUOTE(mb911 @ Aug 15 2021, 02:35 AM) *

Love to see everyone finishing up these projects. Most of us started around the same time including Brent, Glen, Dion and now Nick. Very cool

(IMG:style_emoticons/default/agree.gif) great to see these conversions going on ,best of luck for that "first start" for you guys....trust me its an epic day (IMG:style_emoticons/default/beerchug.gif) .
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nditiz1
post Aug 15 2021, 04:44 AM
Post #18


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
Got the "brake thingy" loosely mounted. If anyone was wondering I did have my regulator mounted closer to the 6 mount. PMB hooked me up with early lines, the T fitting, a cap for the rear port, but alas no banjo bolt and washers. I put up the Bat signal in the parts section if anyone has those they can ship out. Also, I am either looking for the 90 fitting and or the small coupler behind the FW so I can splice these 2 lines together. I'm surprised PMB has not come up with a simple pre-bent conversion line that mounts to the coupler behind the FW and this older mounting location.

I mounted it with Riv Nuts, man they are great. Next onto the return fuel line thingy.

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1629024251.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1629024252.2.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nditiz1
post Aug 19 2021, 10:55 PM
Post #19


Senior Member
***

Group: Members
Posts: 1,202
Joined: 26-May 15
From: Mount Airy, Maryland
Member No.: 18,763
Region Association: MidAtlantic Region
Updates:

I haven't really shown any picture progress as I have been working on figuring out the wiring for this EFI. I have the wiring pretty much done and am getting the final touches done for the engine for the test run.

Replace RMS - I don't like the look of the new boogered up one.
Install flywheel
Install clutch/PP
Run fuel line to FPR and then to Jerry can
Run fuel line to fuel pump and mount it somewhere
Run oil lines to 911 oil tank dangling from bar
Hook in all wires (MS2, Alt, Starter, Fuel Pump)
Make a switch to simulate ignition
Make a push button starter
Mate 901 tranny half to engine
Install starter
Install belt

Go! hopefully

(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-18763-1629435334.1.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jaredmcginness
post Aug 20 2021, 05:55 AM
Post #20


...
***

Group: Members
Posts: 505
Joined: 12-June 19
From: Baltimore
Member No.: 23,209
Region Association: MidAtlantic Region
Totally bad ass Nick. Eternally jealous of that motor. Twin plug + ITB just sounds cool.

Give me a holler if you need an extra set of hands installing it or anything.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

7 Pages V  1 2 3 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 31st October 2024 - 08:20 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...