![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Allan |
![]()
Post
#1
|
Teenerless Weenie ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California ![]() |
I have a guy flying in tomorrow to swap some carbs and he has offered to adjust my valves and tune the car. What exactly will I need? Upper & lover valve cover gaskets, sump-plate gasket(s), drain plug gasket, oil filter?
Thanks... |
Cap'n Krusty |
![]()
Post
#2
|
Cap'n Krusty ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California ![]() |
Valve cover gasket kit. It includes the sump stuff, nuts, and washers. "Turbo" valve covers are nice, too, unless it's a 914/6. If it is, then early SC lower covers are a nice addition. Mahle oil filter. A case of oil. The Cap'n
|
SLITS |
![]()
Post
#3
|
||
"This Utah shit is HARSH!" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None ![]() ![]() |
"And a partridge in a pear tree"..................... Hi Allan (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) |
||
J P Stein |
![]()
Post
#4
|
Irrelevant old fart ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None ![]() |
& a 13mm box end wrench, flat blade screwdriver, & a .004 feeler gauge.
|
Allan |
![]()
Post
#5
|
||
Teenerless Weenie ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California ![]() |
What's the deal with the special "must have" curved feeler gauge that Pelican sells? |
||
SLITS |
![]()
Post
#6
|
||||
"This Utah shit is HARSH!" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None ![]() ![]() |
Makes it a shitpile easier to get the feeler where it needs to be.....or so I'm told |
||||
ejm |
![]()
Post
#7
|
I can see the light at the end of the tunnel ![]() ![]() ![]() ![]() Group: Members Posts: 2,695 Joined: 3-February 03 From: Massachusetts Member No.: 224 Region Association: None ![]() |
a large drain pan is nice to have (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
|
TimT |
![]()
Post
#8
|
||
retired ![]() ![]() ![]() ![]() Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 ![]() |
take the 0.004 blade out from your feeler gauge set and bend it, I bought some 004 feeler stock.. when the piece Im using gets to beat up, I cut and shape another piece of the shim stock |
||
J P Stein |
![]()
Post
#9
|
Irrelevant old fart ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None ![]() |
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 23rd June 2024 - 01:57 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |