Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

46 Pages V « < 4 5 6 7 8 > »   
 Reply to this topicStart new topic
> Porsche 914 - 8 GTT, December '24 Update
0396
post Mar 9 2014, 10:24 AM
Post #101


Advanced Member
****

Group: Members
Posts: 2,046
Joined: 13-October 03
From: L.A. Calif
Member No.: 1,245
Region Association: Southern California
QUOTE(Maltese Falcon @ Mar 7 2014, 09:44 PM) *

SQS sequential shifter system for the 996gt2 transaxle.
We will need to have a longer cable made for mid engine application.
Congrats on the progress and build. As to the sequential shifter, can you please elaborate on trans/ shifter ...factory is not sequential and to my knowledge, there's only one outfit in Europe that made a setup for the 996 trans that is sequential. Thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MATTYLITE
post Mar 9 2014, 11:01 AM
Post #102


Member
**

Group: Members
Posts: 101
Joined: 23-August 12
From: California
Member No.: 14,843
Region Association: Southern California
QUOTE(396 @ Mar 9 2014, 09:24 AM) *

QUOTE(Maltese Falcon @ Mar 7 2014, 09:44 PM) *

SQS sequential shifter system for the 996gt2 transaxle.
We will need to have a longer cable made for mid engine application.
Congrats on the progress and build. As to the sequential shifter, can you please elaborate on trans/ shifter ...factory is not sequential and to my knowledge, there's only one outfit in Europe that made a setup for the 996 trans that is sequential. Thanks


This SQS Sequential Shifter is an adapter kit to the factory 996 GT2 Transmission, meaning it keeps the clutch in between shifting, but instead of throwing the gear lever in an H - pattern, you're shifting back and forth for secure shifting, every time.

More detailed info here:
http://www.sequentialshifters.com/


https://www.youtube.com/watch?v=M216DVI-TgU



https://www.youtube.com/watch?v=iHSkpKJ1nv0
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
0396
post Mar 9 2014, 11:23 AM
Post #103


Advanced Member
****

Group: Members
Posts: 2,046
Joined: 13-October 03
From: L.A. Calif
Member No.: 1,245
Region Association: Southern California
Oh ya, the EVOMS guys. Yes thanks for pushing my memory cells -(IMG:style_emoticons/default/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MATTYLITE
post Mar 11 2014, 12:09 AM
Post #104


Member
**

Group: Members
Posts: 101
Joined: 23-August 12
From: California
Member No.: 14,843
Region Association: Southern California
Here are some high - res photos of the Sequential Adapter, and a mock up of how it'll look in the car, eventually...

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518187.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518187.2.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518187.3.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518187.4.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518187.5.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518188.6.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1394518188.7.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dr Evil
post Mar 12 2014, 08:53 AM
Post #105


Send me your transmission!
***************

Group: Members
Posts: 23,034
Joined: 21-November 03
From: Loveland, OH 45140
Member No.: 1,372
Region Association: MidAtlantic Region
Wow, sexy (IMG:style_emoticons/default/popcorn[1].gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jaxdream
post Mar 13 2014, 08:15 AM
Post #106


Senior Member
***

Group: Members
Posts: 974
Joined: 8-July 08
From: North Central Tennessee
Member No.: 9,270
Region Association: South East States
Cutting out the tunnel top is a great way for access to add needed controls and such. Are there any plans to fab a cover for the top or just leave it open ??? GR8 build so far !!!! Should be a hoot !!!!!! (IMG:style_emoticons/default/piratenanner.gif) (IMG:style_emoticons/default/piratenanner.gif)

Jack
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
CptTripps
post Mar 13 2014, 10:40 AM
Post #107


:: Punch and Pie ::
****

Group: Members
Posts: 3,584
Joined: 26-December 04
From: Mentor, OH
Member No.: 3,342
Region Association: Upper MidWest
Wicked cool!

Seeing that tells me I definitely need to cut the top of my tunnel out too. There's a lot of room there to lay things out nicely if you have ready access to it. Adding in some braces every 10" or so should help make up for any lost rigidity. No?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Johny Blackstain
post Mar 13 2014, 10:44 AM
Post #108


Walnut Elite Stratocaster player
****

Group: Members
Posts: 3,434
Joined: 5-December 06
From: The Shenandoah River
Member No.: 7,318
Region Association: MidAtlantic Region
(IMG:style_emoticons/default/popcorn[1].gif) This thing is gonna be a monster!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Maltese Falcon
post Mar 13 2014, 07:49 PM
Post #109


Advanced Member
****

Group: Members
Posts: 4,895
Joined: 14-September 04
From: Mulholland SoCal
Member No.: 2,755
Region Association: None
QUOTE(jaxdream @ Mar 13 2014, 07:15 AM) *

Cutting out the tunnel top is a great way for access to add needed controls and such. Are there any plans to fab a cover for the top or just leave it open ??? GR8 build so far !!!! Should be a hoot !!!!!! (IMG:style_emoticons/default/piratenanner.gif) (IMG:style_emoticons/default/piratenanner.gif)

Jack


Jack,Doug, sectional plates are being re-attached to the top of the front and rear tunnel areas.
These will be removable , so we can always go back in for running lines or other added cables+ circuits. The new plate that will be the foundation for the shifter is made from .250 cold roll metal plate, which will be welded in place.
If you don't have a way to put a top back onto your tunnel, I would not cut it off. It adds rigidity to the unibody.
Marty
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Maltese Falcon
post Apr 26 2014, 02:06 AM
Post #110


Advanced Member
****

Group: Members
Posts: 4,895
Joined: 14-September 04
From: Mulholland SoCal
Member No.: 2,755
Region Association: None
Intake now finished up with RC injectors, rails, throttle body, tps. Aka the "Flying Mailbox" !
The Daytona velocity stack will not be used in our forced induction engine.Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Maltese Falcon
post Apr 26 2014, 02:13 AM
Post #111


Advanced Member
****

Group: Members
Posts: 4,895
Joined: 14-September 04
From: Mulholland SoCal
Member No.: 2,755
Region Association: None
Windage screens installed in the cnc dry sump oil pan...Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mike Bellis
post Apr 26 2014, 07:48 AM
Post #112


Resident Electrician
*****

Group: Members
Posts: 8,346
Joined: 22-June 09
From: Midlothian TX
Member No.: 10,496
Region Association: None
QUOTE(Maltese Falcon @ Apr 26 2014, 01:06 AM) *

Intake now finished up with RC injectors, rails, throttle body, tps. Aka the "Flying Mailbox" !
The Daytona velocity stack will not be used in our forced induction engine.Attached Image

A work of art! (IMG:style_emoticons/default/smilie_pokal.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dave_Darling
post Apr 26 2014, 11:48 AM
Post #113


914 Idiot
***************

Group: Members
Posts: 15,063
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California
Guys like that make it seem so easy. "Of course, don't all your welds automatically look like a perfect stack of nickels?"

Major league envy here...

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MATTYLITE
post Apr 26 2014, 08:52 PM
Post #114


Member
**

Group: Members
Posts: 101
Joined: 23-August 12
From: California
Member No.: 14,843
Region Association: Southern California
Seam welding every part of the car:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1398567167.1.jpeg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1398567167.2.jpeg)

As you can see in the background in the car, every seam has been welded:
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1398567167.3.jpeg)

Inner long / Cabin stiffening kit welded in:
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1398567167.4.jpeg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1398567167.5.jpeg)

Here is the rear quarter panel almost ready to fit some monstrous wide fender flares:
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1398567167.6.jpeg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MATTYLITE
post Jun 1 2014, 12:03 PM
Post #115


Member
**

Group: Members
Posts: 101
Joined: 23-August 12
From: California
Member No.: 14,843
Region Association: Southern California
Radiator came in:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645823.1.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645824.2.jpg)

Finally, after several weeks of welding, all the seams are now fully welded:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645824.3.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645824.4.jpg)

Here is the mock up of the strut bar braces that were welded in. And yes the wood is only a temporary holder for alignment. The actual strut bar that connects to these braces will be cnc'd from an aluminum block:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645824.5.jpg)

AND THE GRAND FINALLY!! WHAT YOU'VE ALL BEEN WAITING FOR... (well at least 14 months for me):

The engine in its completion!

Quick specs:
2005 Cayenne Twin Turbo motor, bored out from 4.5 to 5.0 Litre.
All new / upgraded everything internally.
Wilson Intake Manifold (yes the same intake manifold used on the 2010 Winning 24 Hour of Daytona, Prototype Cayenne V8 N/A powered car!)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645824.6.jpeg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645824.7.jpg)

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1401645825.8.jpeg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
aircooledtechguy
post Jun 1 2014, 12:48 PM
Post #116


The Aircooledtech Guy
***

Group: Members
Posts: 1,966
Joined: 8-November 08
From: Anacortes, WA
Member No.: 9,730
Region Association: Pacific Northwest
Holy high-power!! That is SICK!!! Congrats!!! (IMG:style_emoticons/default/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
wndsrfr
post Jun 1 2014, 04:21 PM
Post #117


Senior Member
***

Group: Members
Posts: 1,442
Joined: 30-April 09
From: Rescue, Virginia
Member No.: 10,318
Region Association: MidAtlantic Region
Pure PORNsche....
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MATTYLITE
post Nov 15 2014, 06:06 AM
Post #118


Member
**

Group: Members
Posts: 101
Joined: 23-August 12
From: California
Member No.: 14,843
Region Association: Southern California
Hello fellow forum members, sorry for the temporary leave of absence on updates. There have been massive amounts of progress on the project vehicle, and we’d like to take a moment to share it with you.

Back in July of this year we flew out to Texas for a meat and greet with Ben Lozano, one of the great guys behind Lozano Brothers Porting, and no that is not a typo, there was a lot of meat in Texas. A LOT OF MEAT! First things first of course after a 5 hour flight is to eat like a local.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.1.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.2.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.3.jpg)

After the best BBQ I ever had in my life, we finally made it to Lozano Brothers Porting to view the engine in its final form.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.4.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.5.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.6.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.7.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.8.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.9.jpg)

While we were there, we were treated to some of their other projects that were around their place of business.
2 ready to race Cayenne V8 N/A Daytona Spec Engines:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.10.jpg)
Used Cayenne V8 Engine Blocks:
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.11.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.12.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.13.jpg)

And of course you don’t leave Lozano Brothers Porting w/o a quick history lesson from Ben Lozano himself.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.14.jpg)

Below is one of the most prestigious trophies in the history of motorsports, the Manufacturer’s Trophy. The story behind this one is as follows,
After the Action Express car won the 2010 24 Hours of Daytona, the award ceremony immediately commenced of course. When the presenter announced the award for the Manufacturer’s Trophy, Porsche Motorsport North America declined to accept the award, based on the facts that one, they did not supply the winning car’s power train, and two, Porsche (to this day) do not support or promote their V8 engines for racing purposes. So, who else was left to accept the trophy? None other than Ben Lozano himself of course! Not bad from a band of brothers from the Lone Start State.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.15.jpg)

…When in Rome.. or should I say The Americas!

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.16.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.17.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.18.jpg)

Didn’t I say this was a meat & greet trip?

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.19.jpg)

I don’t always believe what I’m told.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.20.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.21.jpg)

After leaving Texas, it was time to get back to work. Here we cut out some of the metal in the body to feed the radiator lines through the front into the inner longs and out the rear into the engine compartment.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.22.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053214.23.jpg)

Removing all of the caulking in the vehicle. At least 8 – 10lbs of caulking removed in total.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.24.jpg)

Oil Cooler mock – up: There will be 2, one on each side.

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.25.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.26.jpg)

Once the engine arrived back at our headquarters in California, we immediately shipped it to our long time associates over at AASCO Motorsports for the necessary mating hardware.

Tilton Triple Carbon / Carbon Clutch:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.27.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.28.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.29.jpg)

And the mating plate itself:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.30.jpg)

Just over an inch in width:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.31.jpg)

And Voila! A World’s first. Cayenne V8 TT mated to an inverted 996 GT2 Transaxle. A moment we’ve waited for, for so long, that we stayed way after closing time for the guys at AASCO. Sorry Vince, hope you can understand!

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.32.jpg)

More cage work progress in the rear:

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.33.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.34.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053215.35.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053216.36.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053216.37.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053216.38.jpg)
(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053216.39.jpg)

And a quick glimpse of the wiring progress so far. Who would've thought Mercedes Benz made parts for Porsche? Well, it wouldn't be the first time..

(IMG:http://www.914world.com/bbs2/uploads_offsite/i771.photobucket.com-14843-1416053216.40.jpg)

Many more pictures to follow!

All the best,
Matthew E. Schneider
MSDS Inc.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mepstein
post Nov 15 2014, 07:28 AM
Post #119


914-6 GT in waiting
***************

Group: Members
Posts: 19,655
Joined: 19-September 09
From: Landenberg, PA/Wilmington, DE
Member No.: 10,825
Region Association: MidAtlantic Region
WOW!

That's all I got.
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Cairo94507
post Nov 15 2014, 08:10 AM
Post #120


Michael
**********

Group: Members
Posts: 10,134
Joined: 1-November 08
From: Auburn, CA
Member No.: 9,712
Region Association: Northern California
This is the most over the top outstanding build I believe I have ever seen. The quality of the work and the extent of detail is mind blowing. (IMG:style_emoticons/default/smilie_pokal.gif)
User is online!Profile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

46 Pages V « < 4 5 6 7 8 > » 
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 29th December 2024 - 02:00 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...