![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
StratPlayer |
![]()
Post
#1
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
I just got me a powder coating system, I bought the craftsman setup, don't need a compressor to run the gun. I dedided to coat my spare wheel for my spare tire. Never done this before but it seems straight forward and pretty easy. The hardest part is preparing the piece to be coated.
Anyway heres some pics. of the process The wheel all masked off ready to take some powder Attached image(s) ![]() |
StratPlayer |
![]()
Post
#2
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
The powder is applied and ready for the oven to cure
Attached image(s) ![]() |
Mueller |
![]()
Post
#3
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
damn.....I thought by the 1st picture you powdercoated it green (IMG:http://www.914world.com/bbs2/html/emoticons/clap56.gif)
|
StratPlayer |
![]()
Post
#4
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
After it cooled in the oven while the oven was cooling down, I heard this is the best way to do it, let the piece cool down in the oven as the oven is cooling down.
Attached image(s) ![]() |
StratPlayer |
![]()
Post
#5
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
Now just a bit of sanding an polishing and the wheel is ready to go
Attached image(s) ![]() |
Mueller |
![]()
Post
#6
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
so how does the powder get applied w/no compressor?
|
maf914 |
![]()
Post
#7
|
Not a Guru! ![]() ![]() ![]() ![]() Group: Members Posts: 3,049 Joined: 30-April 03 From: Central Florida Member No.: 632 Region Association: None ![]() ![]() |
What kind of masking tape is that? I was surprised to see it go through the oven heat cycle. (IMG:http://www.914world.com/bbs2/html/emoticons/idea.gif)
|
StratPlayer |
![]()
Post
#8
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
The gun has its own fan system for blowing the powder out of the cup its put into, the trigger is a variable speed trigger so you can control how much powder is being applied, its a great unit it looks like a blow drier.
After reading a thread on the PP 911 board I went a bought one. Good thread on the product. http://forums.pelicanparts.com/showthread....=powder+coating |
StratPlayer |
![]()
Post
#9
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
The masking tape is high temp masking tape from 3M
|
yarin |
![]()
Post
#10
|
'14-X'in FOOL ![]() ![]() ![]() Group: Members Posts: 988 Joined: 13-May 03 From: Guttenberg, NJ Member No.: 693 Region Association: North East States ![]() |
The most difficult part of setting your system up is getting an oven to dedicate to power coating. I wish I had 220V in my garage. You don't want the oven in your house, the fumes are BAD.
Ok... that is 2nd on the list. First is cleaning your material, getting rid of all the crud. Sandblasting works wonderfully once the material has been scrubbed down. |
StratPlayer |
![]()
Post
#11
|
StratPlayer ![]() ![]() ![]() ![]() Group: Members Posts: 3,278 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains ![]() ![]() ![]() |
Couple more items I coated over the weekend
Attached image(s) ![]() |
Eric_Shea |
![]()
Post
#12
|
PMB Performance ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 19,279 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains ![]() ![]() |
I'll be right over. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
|
tat2dphreak |
![]()
Post
#13
|
stoya, stoya, stoya ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 8,797 Joined: 6-June 03 From: Wylie, TX Member No.: 792 Region Association: Southwest Region ![]() ![]() |
I'm so Jealous... those pieces look awesome! (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
|
736conver |
![]()
Post
#14
|
||
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,117 Joined: 25-May 03 From: SE Wisconsin Member No.: 736 Region Association: None ![]() |
(IMG:http://www.914world.com/bbs2/html/emoticons/agree.gif) Even in my 2 car garage the fumes get bad. During the winter I leave the door open. |
||
Aaron Cox |
![]()
Post
#15
|
Professional Lawn Dart ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California ![]() |
how much is the rig to powdacoat?
|
yarin |
![]()
Post
#16
|
||
'14-X'in FOOL ![]() ![]() ![]() Group: Members Posts: 988 Joined: 13-May 03 From: Guttenberg, NJ Member No.: 693 Region Association: North East States ![]() |
http://www.columbiacoatings.com/Chicago_Electric.htm I bought this about two years ago. As cheap as $70. It gets the job done. Craftsman makes one that doens't need a compressor. Haven't tried that one. |
||
yarin |
![]()
Post
#17
|
'14-X'in FOOL ![]() ![]() ![]() Group: Members Posts: 988 Joined: 13-May 03 From: Guttenberg, NJ Member No.: 693 Region Association: North East States ![]() |
Stratplayer... how did you do the intake plenum? Did u take it down to bare metal? Or scrape off the gunk and powder over the existing paint?
|
alpha434 |
![]()
Post
#18
|
My member number is no coincidence. ![]() ![]() ![]() ![]() Group: Members Posts: 3,154 Joined: 16-December 05 From: Denver, CO Member No.: 5,280 Region Association: Rocky Mountains ![]() |
Huh? I want green fuches now.
|
Aaron Cox |
![]()
Post
#19
|
Professional Lawn Dart ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California ![]() |
how much powder is needed to do a wheel?
i want to do my cookie cutters in bright red..... |
Gint |
![]()
Post
#20
|
||
Mike Ginter ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 16,086 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains ![]() ![]() |
About a tablespoon to do what Jim did here. Couple three tblsp to do an entire wheel face. Maybe 4-5 to do the entire wheel. At the most. |
||
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 25th June 2024 - 08:07 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |