 EBrake pivot yoke, Best way to reconnect |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| jim_hoyland |
 Sep 19 2014, 07:08 AM
Post
#1
|
|
Get that VIN ?  Group: Members Posts: 9,561 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California 
 |
What is the best way to get enough slack at the eBrake pivot yoke so that the cable and pin can be reinstalled ?
It was hard to remove I didn't loosen the eBrake cables at the firewall nor the caliper Attached image(s) 
|
   |
 
|
| bdstone914 |
Sep 19 2014, 07:50 AM
Post
#2
|
|
bdstone914 Group: Members Posts: 4,735 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 |
You can attach the cable to the handle before you bolt it to the long. You may be able to pull to handle enough to get it back on the stud. Otherwise you will have to loosen the cables at the firewall then readjust after installing the handle.
|
|
|
|
| jim_hoyland |
Sep 19 2014, 07:53 AM
Post
#3
|
|
Get that VIN ? Group: Members Posts: 9,561 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California
|
[quote name='bdstone914' date='Sep 19 2014, 06:50 AM' post='2087999']
You can attach the cable to the handle before you bolt it to the long. You may be able to pull to handle enough to get it back on the stud. Otherwise you will have to loosen the cables at the firewall then readjust after installing the handle. [/ That worked ! Thanks. I have the new lever mounted and just need to take up some slack at the firewall |
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 05:35 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.