 Low ri-der rides a little lower |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| grantsfo |
 Jul 1 2005, 07:32 PM
Post
#1
|
|
Arrrrhhhh!  Group: Members Posts: 4,327 Joined: 16-March 03 Member No.: 433 Region Association: None  |
Stanford was having a parking lot special on lowering, alignments and corner balancing today. Thanks to Nathan my car is riding a lot lower and sporting more negative camber and its nicely corner balanced. Nathan's going so fast he has to help some of us keep up with his blazing times.
Thanks again for all your help Nathan! I owe you more than a few beers for all your help today. The car already feels better and I cant wait until the next AX! You have heard of Smart Strings? ....well these are Cheap Strings (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) : Attached image(s) 
|
   |
 
|
| xsboost90 |
Jul 1 2005, 09:04 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,393 Joined: 2-August 04 From: cincinnati Member No.: 2,432 |
lower the better, thats what i always say.
Attached thumbnail(s) 
|
|
|
|
| SGB |
Jul 1 2005, 09:36 PM
Post
#3
|
|
just visiting Group: Members Posts: 4,086 Joined: 8-March 03 From: Huntsville, AL Member No.: 404 Region Association: South East States |
Just read an article (in panorama) which essentially concluded that as long as the braking capaciity exists to break the tires grip, the ONLY way to improvevehicle braking performance is to LOWER the CG.
|
|
|
|
| grantsfo |
Jul 1 2005, 09:54 PM
Post
#4
|
|
Arrrrhhhh! Group: Members Posts: 4,327 Joined: 16-March 03 Member No.: 433 Region Association: None |
Anyone who has seen my car knows this is a big improvement. I agree with better braking and lower CG. The car feels much better at this hieght.
Attached image(s) 
|
|
|
|
| xsboost90 |
Jul 1 2005, 10:21 PM
Post
#5
|
|
Senior Member Group: Members Posts: 1,393 Joined: 2-August 04 From: cincinnati Member No.: 2,432 |
the only bad thing i see about lowering these cars is that once the front arms are level or the balljoint is higher than the suspension center, the camber goes from negative to positive. when going into a corner stock, the suspension geometry makes negative camber as the corner increases. When its too low, you start making positive, of course if its negative enough, it just makes it less negative closer to 0camber. Sometimes bigger brakes ARE the key.
|
|
|
|
| Joe Ricard |
Jul 2 2005, 05:33 AM
Post
#6
|
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
So Grant did you put the big fatty tiars on yet? The car is nice and low. Looks great! those are some sexy looking Fuchs. I would think you are going to love it on te AX course.
Now you will have to calibrate your eye ball to know what bumps in the road are too high. Speed bumps are now your nemisis. 13 years of drivig a 928 that was 4" off the ground and now the red neck racer that is 3 7/8 I can get around pretty good. You get used to attacking ALL driveways at and angle. |
|
|
|
| xsboost90 |
Jul 2 2005, 06:59 AM
Post
#7
|
|
Senior Member Group: Members Posts: 1,393 Joined: 2-August 04 From: cincinnati Member No.: 2,432 |
yeah nothing worse than sewer lids sticking up in the middle of the street!
|
|
|
|
| ClayPerrine |
Jul 2 2005, 08:24 AM
Post
#8
|
|
Life's been good to me so far..... Group: Admin Posts: 15,908 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille 
|
When we had our house built, we specifically told the builder that the approach from the street had to be nice and gentle. He kinda blew us off until he saw us pull up in Betty's 914. Then he assured us that they would make it a gentle approach.
Otherwise we wouldn't have been able to get in the driveway. |
|
|
|
| Joe Ricard |
Jul 2 2005, 09:03 AM
Post
#9
|
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Yea passed on a house because of the drive way. Even angled the car bumped the nose 1st. Got the one now that is level to the street and has 2 car garage and work shop. (IMG:http://www.914world.com/bbs2/html/emoticons/mueba.gif)
|
|
|
|
| Joe Bob |
Jul 2 2005, 11:51 AM
Post
#10
|
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
I always cut driveways at an angle....I caught myself doing it in the wife's 3/4 ton Yukon truck....habits....
|
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th November 2024 - 08:49 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.