 Oil temp sender, VDO oil temp sender help needed |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| rgalla9146 |
 Feb 15 2020, 03:37 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 4,671 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None 
 |
I have a VDO temp gauge I want to hook up but don't have a sender that is known to be compatable.
The gauge is part # 310 274/82/2 12V The needle lifts slightly when wired to the stock sender in my 914 6 The right sender has to fit an early 2.0 6cyl. TIA Rory Attached image(s)  
|
   |
 
|
| 914Sixer |
Feb 15 2020, 04:56 PM
Post
#2
|
|
914 Guru Group: Members Posts: 9,034 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region
|
Stock sender should work with gauge. It is 150C or 302 F
|
|
|
|
| rgalla9146 |
Feb 15 2020, 06:52 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 4,671 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None
|
QUOTE(914Sixer @ Feb 15 2020, 05:56 PM)  Stock sender should work with gauge. It is 150C or 302 F Mark Am I that lucky ? I'm waiting for a GT fuel gauge to run with my 911 combo temp/press I'm planning a long trip so looked at what I might substitute for peace of mind. I have small oil press/oil temp gauges in a VDO mount that will fit in place of the ash tray. Hooked up the oil press gauge/ warning light no problem. Hooked up the temp. gauge too using the 6 sender. The needle lifts slightly ign. on but only have temporary connections and very cold weather here so can't verify indication of higher temp untill I rig up better connections. Then I can drive the car to achieve higher operating temp and verify compatability. Will report back. Thank you Rory |
|
|
|
| rgalla9146 |
Feb 16 2020, 05:27 PM
Post
#4
|
|
Advanced Member Group: Members Posts: 4,671 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None
|
QUOTE(914Sixer @ Feb 15 2020, 05:56 PM) Stock sender should work with gauge. It is 150C or 302 F Fantastic. Mark you were right. Completed the install and drove the car. On a 40 degree day I saw 170 degree oil temp with the stock sender. Glad to have it done with parts I had on hand. Thanks for the help. Don't know why the mount looks brownish. Attached image(s) 
|
|
|
|
| 914Sixer |
Feb 16 2020, 07:26 PM
Post
#5
|
|
914 Guru Group: Members Posts: 9,034 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region
|
Glad to help (IMG:style_emoticons/default/beerchug.gif)
|
|
|
|
|
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 04:28 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.