 Electrical: Turn signals not working, Front turn signals don't work when headlights are on |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| dennisphelan |
 Aug 20 2024, 04:14 PM
Post
#1
|
|
Newbie  Group: Members Posts: 17 Joined: 10-December 18 From: Dundee Oregon Member No.: 22,713 Region Association: Pacific Northwest  |
I have this strange problem. The front and rear turn signals work until I turn on the headlights. The front turn signals stop working, but the rear ones continue to work. Where should I look?
Dennis Phelan dennis.phelan@gmail.com |
   |
 
|
| NARP74 |
Aug 20 2024, 04:39 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,295 Joined: 29-July 20 From: Colorado, USA, Earth Member No.: 24,549 Region Association: Rocky Mountains |
Stock bulbs or LED conversion?
|
|
|
|
| Dave_Darling |
Aug 22 2024, 12:50 PM
Post
#3
|
|
914 Idiot Group: Members Posts: 15,063 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
Check the wiring for all four turn signal buckets. Having a couple of wires switched can cause this behavior.
Search through this page for drawings of how they should be wired: https://bowlsby.net/914/Classic/TechNotebook.htm --DD |
|
|
|
| dennisphelan |
Sep 18 2024, 08:35 PM
Post
#4
|
|
Newbie Group: Members Posts: 17 Joined: 10-December 18 From: Dundee Oregon Member No.: 22,713 Region Association: Pacific Northwest |
Sorry for the late reply. They are LED conversions
|
|
|
|
| Spoke |
Sep 19 2024, 10:40 AM
Post
#5
|
|
Jerry Group: Members Posts: 7,104 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None
|
Hey Dennis,
As Dave mentioned, check the wiring on the front buckets. Make sure the ground is connected to ground. The only connection between turnsignals and headlights is the dual filament front turnsignal sockets where the low intensity light is powered by headlights and the high intensity light is powered by the flasher relay. |
|
|
|
|
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 21st December 2024 - 09:12 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.