Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> My turn at motorcycle Throttle bodies, making progress
Mark Henry
post May 10 2013, 10:57 AM
Post #1


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
Like I need another project... Beginning to be as bad as Dr Evil (IMG:style_emoticons/default/laugh.gif) ... (IMG:style_emoticons/default/huh.gif) ... (IMG:style_emoticons/default/unsure.gif)

I need some TB's for my 914/4 type 4 into bug project engine.
Jenvey, Extrudabody and TWM TB's are crazy frickin' expensive for what they are, so I'm going the Motorcycle TB route.

This is what came in the mail today, stuff looks real good (IMG:style_emoticons/default/piratenanner.gif)


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
4 Pages V  1 2 3 > »   
 Reply to this topicStart new topic
Replies(1 - 19)
Mark Henry
post May 10 2013, 11:01 AM
Post #2


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
Damn... you think they would get the spacing correct (IMG:style_emoticons/default/mad.gif)

80mm center to center spacing..... (IMG:style_emoticons/default/sad.gif) I need 90mm....


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post May 10 2013, 11:07 AM
Post #3


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
The bike injectors are shorter and I don't know if the fuel rails have enough meat to be cut an tapped for pipe threads.

The seals area bit different as well but think it's workable.

The bike injectors are only 22lbs the black injectors are 50lbs


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post May 10 2013, 11:09 AM
Post #4


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
Take them all apart and i have 4 separate ITB's (IMG:style_emoticons/default/shades.gif)


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post May 10 2013, 11:13 AM
Post #5


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
Going to take a bit of (IMG:style_emoticons/default/smash.gif) but I'm thinking these are going to work out beauty. (IMG:style_emoticons/default/smile.gif)


.


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post May 10 2013, 11:24 AM
Post #6


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
Going to take me a little bit to get going on this, my 914 is also getting a 3.0 /6 at the same time, so I'm bleeding money....but I try to update as do.

Debating on should I make adaptors or just machine the CB manifolds and JB weld the TB's in place. The JB weld method would save a lot of fab time.
I also should match port the funky bottoms on those TB's.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post May 10 2013, 11:35 AM
Post #7


Resident German
*************************

Group: Admin
Posts: 41,891
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
QUOTE(Mark Henry @ May 10 2013, 10:24 AM) *
Debating on

You should get a set of these:

(IMG:http://www.914world.com/bbs2/uploads/post-11-1124689756.jpg)



That way, you can run the big injectors where they should be, close to the intake valve, and use the TBs to regulate the air.

(IMG:style_emoticons/default/shades.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post May 10 2013, 11:41 AM
Post #8


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
QUOTE(SirAndy @ May 10 2013, 01:35 PM) *

QUOTE(Mark Henry @ May 10 2013, 10:24 AM) *
Debating on

You should get a set of these:

(IMG:http://www.914world.com/bbs2/uploads/post-11-1124689756.jpg)



That way, you can run the big injectors where they should be, close to the intake valve, and use the TBs to regulate the air.

(IMG:style_emoticons/default/shades.gif)


You want to sell those? (IMG:style_emoticons/default/biggrin.gif)

Maybe... I will but for now I think I'll just take the simple route.
I'm trying to shake off the DWD and get my projects done. I can fine tune the details each winter after that.

(IMG:style_emoticons/default/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post May 10 2013, 11:43 AM
Post #9


can't remember
****

Group: Members
Posts: 3,343
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
QUOTE(Mark Henry @ May 10 2013, 08:57 AM) *

Like I need another project... Beginning to be as bad as Dr Evil


What did the TBs come off of? I have pondered this for my TR6.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Randal
post May 10 2013, 12:18 PM
Post #10


Advanced Member
****

Group: Members
Posts: 4,446
Joined: 29-May 03
From: Los Altos, CA
Member No.: 750
Mike Mueller was messing with bike TB's years ago. He went through the whole process which can be see on the link below. I, on the other hand I ended up going the TWM route as their TB fit a Weber type manifold and I had way to many "projects" on my engine.

You can probably contact Mike somewhere on this site or the club site.

OK found the link: http://www.914world.com/bbs2/index.php?sho...torcycle+TB%27s
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post May 10 2013, 12:27 PM
Post #11


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
QUOTE(worn @ May 10 2013, 01:43 PM) *

QUOTE(Mark Henry @ May 10 2013, 08:57 AM) *

Like I need another project... Beginning to be as bad as Dr Evil


What did the TBs come off of? I have pondered this for my TR6.


Well I have at least 40hrs and this is my 3rd set of TB's into the research on this, so I'm not going to tell you what exact make and model.
Google is your friend and the truth is out there.

Looking like I might also build a few sets this winter to sell ...maybe...if I don't I'll tell all...sneak peek (IMG:style_emoticons/default/smile.gif)


Attached thumbnail(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dr Evil
post May 10 2013, 02:32 PM
Post #12


Send me your transmission!
***************

Group: Members
Posts: 23,032
Joined: 21-November 03
From: Loveland, OH 45140
Member No.: 1,372
Region Association: MidAtlantic Region
This is a project I want to do in the future as well (IMG:style_emoticons/default/biggrin.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bulitt
post May 10 2013, 02:44 PM
Post #13


Achtzylinder
****

Group: Members
Posts: 4,188
Joined: 2-October 11
Member No.: 13,632
Region Association: South East States
QUOTE(Mark Henry @ May 10 2013, 01:24 PM) *

Going to take me a little bit to get going on this, my 914 is also getting a 3.0 /6 at the same time, so I'm bleeding money....but I try to update as do.

Debating on should I make adaptors or just machine the CB manifolds and JB weld the TB's in place. The JB weld method would save a lot of fab time.
I also should match port the funky bottoms on those TB's.


Maybe you should just bore the manifolds so the TB recess in the bores, then drill and tap for two hold down screws/tabs for each TB. Looks like there is a recess for o-ring around base of each TB ?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dr Evil
post May 10 2013, 02:47 PM
Post #14


Send me your transmission!
***************

Group: Members
Posts: 23,032
Joined: 21-November 03
From: Loveland, OH 45140
Member No.: 1,372
Region Association: MidAtlantic Region
Or mill of the flange of the manifolds and use a rubber coupler like the bikes do (IMG:style_emoticons/default/smile.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Phoenix-MN
post May 10 2013, 03:53 PM
Post #15


Senior Member
***

Group: Members
Posts: 927
Joined: 23-January 04
From: ST. Bonifacius,MN
Member No.: 1,590
QUOTE(Dr Evil @ May 10 2013, 12:47 PM) *

Or mill of the flange of the manifolds and use a rubber coupler like the bikes do (IMG:style_emoticons/default/smile.gif)


Boy, EFI ITB's is like a sickness. I started my project for my "Tail Dragger" a month or so ago with Suzuki GSX R600 ITB's. Lot's of threads on the Bird Board. I used the stock rubber couplers and redrilled the mounting holes on the manifolds.

Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rick 918-S
post May 10 2013, 05:05 PM
Post #16


Hey nice rack! -Celette
***************

Group: Members
Posts: 20,785
Joined: 30-December 02
From: Now in Superior WI
Member No.: 43
Region Association: Northstar Region
Lots of chatter about ITB's. I'm researching a fuel management that you can apply instead of building on from scratch. I'm hoping to find something to tweek. Why reinvent the wheel. Lots of cars and bikes are running injection. Just take something that the OEM developed and is currently in use and tune it.

Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Randal
post May 10 2013, 05:06 PM
Post #17


Advanced Member
****

Group: Members
Posts: 4,446
Joined: 29-May 03
From: Los Altos, CA
Member No.: 750
QUOTE(Dr Evil @ May 10 2013, 01:47 PM) *

Or mill of the flange of the manifolds and use a rubber coupler like the bikes do (IMG:style_emoticons/default/smile.gif)


Mike Mueller actually did this. Check out the link in my post.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
kevin311
post May 10 2013, 07:07 PM
Post #18


Member
**

Group: Members
Posts: 105
Joined: 22-May 10
From: Tampa Bay Area
Member No.: 11,752
Region Association: None

What size engine are these going on? What are the throat sizes on them? What are you using to control them?
I'm doing something similar with VFR800 ITBs.
I really like how those come apart. The VFRs are 2 two-barrel castings.
I'll be following this one. (IMG:style_emoticons/default/aktion035.gif)



1.7 with VFR800 tbs (work in progress)
http://www.914world.com/bbs2/index.php?showtopic=192548
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Elliot Cannon
post May 10 2013, 07:09 PM
Post #19


914 Guru
*****

Group: Retired Members
Posts: 8,487
Joined: 29-December 06
From: Paso Robles Ca. (Central coast)
Member No.: 7,407
Region Association: None
What will be used to trigger the injectors?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mike Bellis
post May 10 2013, 07:21 PM
Post #20


Resident Electrician
*****

Group: Members
Posts: 8,346
Joined: 22-June 09
From: Midlothian TX
Member No.: 10,496
Region Association: None
You need some of these...

(IMG:http://www.914world.com/bbs2/uploads_offsite/e.ridersdiscount.com-10496-1368235292.1.jpg)

http://www.ebay.com/itm/Bikers-Choice-2-Bo...ies&vxp=mtr
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

4 Pages V  1 2 3 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 24th November 2024 - 03:24 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...