![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Mueller |
![]()
Post
#1
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
If all goes as planned, I should be swapping out my stock old distributor for a brand new Mallory distributor running a CDI box in the next few weeks. In the past this was not possible since the trigger points for the FI are located in the base of the D-Jet distributor....on my work bench, I have come up with a bolt-on solution that should cost no more than about $35 that will fit inside of a Mallory Unilite distributor.....I do not have an MSD distributor, but I'd imagine the same type of unit could be installed fairly easily.
just thought I'd see if I am the only crazy person wanting to upgrade/change their ignition? (legal mod for local Bp cars, you must keep the stock FI, but no limit on the ignition) |
![]() ![]() |
Engman |
![]()
Post
#2
|
Zoisite ![]() ![]() ![]() Group: Benefactors Posts: 1,349 Joined: 25-March 03 From: New Albany, IN Member No.: 475 ![]() ![]() |
Be careful - it is probably patented and you will be sued!
(IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) m |
r_towle |
![]()
Post
#3
|
Custom Member ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 24,599 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States ![]() ![]() |
i am interested....please describe more...
Rich |
Rhodes71/914 |
![]()
Post
#4
|
Glacier ![]() ![]() ![]() Group: Members Posts: 1,374 Joined: 8-August 04 From: End of the Road, Alaska Member No.: 2,482 ![]() |
Would love the option of an aftermarket dizzy, please tell us more!
|
TravisNeff |
![]()
Post
#5
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 5,082 Joined: 20-March 03 From: Mesa, AZ Member No.: 447 Region Association: Southwest Region ![]() ![]() |
absolutely, anything beats a kilobuck for a spankin new OE distributor
|
Air_Cooled_Nut |
![]()
Post
#6
|
||
914 Ronin - 914 owner who lost his 914club.com ![]() ![]() ![]() Group: Members Posts: 1,748 Joined: 19-April 03 From: Beaverton, Oregon Member No.: 584 Region Association: None ![]() |
(IMG:http://www.914world.com/bbs2/html/emoticons/agree.gif) |
||
ChrisReale |
![]()
Post
#7
|
Sleazy ![]() ![]() ![]() ![]() Group: Members Posts: 2,665 Joined: 20-January 03 From: San Francisco Member No.: 176 ![]() |
yes
|
Katmanken |
![]()
Post
#8
|
You haven't seen me if anybody asks... ![]() ![]() ![]() ![]() Group: Members Posts: 4,738 Joined: 14-June 03 From: USA Member No.: 819 Region Association: Upper MidWest ![]() |
Engman, chill...
Ya wanna talk about it PM me.... Mike, nice idea... Ken |
airsix |
![]()
Post
#9
|
||
I have bees in my epiglotis ![]() ![]() ![]() ![]() Group: Members Posts: 2,196 Joined: 7-February 03 From: Kennewick Man (E. WA State) Member No.: 266 ![]() |
Mike, Is it solid-state or mechanical? Just out of curiosity. -Ben M. |
||
Mueller |
![]()
Post
#10
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
solid-state....something filled with magical smoke (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)
|
Aaron Cox |
![]()
Post
#11
|
Professional Lawn Dart ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California ![]() |
rock on mike!!!!
I knew you couldnt leave it alone (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) hes at it again! making great stuff for 914's (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) |
TheCabinetmaker |
![]()
Post
#12
|
I drive my car everyday ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,304 Joined: 8-May 03 From: Tulsa, Ok. Member No.: 666 ![]() |
Mike, one word from the djet purist. Yes!
|
airsix |
![]()
Post
#13
|
||
I have bees in my epiglotis ![]() ![]() ![]() ![]() Group: Members Posts: 2,196 Joined: 7-February 03 From: Kennewick Man (E. WA State) Member No.: 266 ![]() |
'Atta boy. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif) -Ben M. |
||
Gint |
![]()
Post
#14
|
Mike Ginter ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 16,086 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains ![]() ![]() |
Mikey, you gotta know that this idea is a winner. Even without asking. I don't have a /4 and I know it's a great idea.
Do it. |
azbill |
![]()
Post
#15
|
Member ![]() ![]() Group: Members Posts: 455 Joined: 26-July 04 From: Glendale, Az Member No.: 2,403 Region Association: Southwest Region ![]() |
How soon will they be available - (IMG:http://www.914world.com/bbs2/html/emoticons/monkeydance.gif) HURRY I'm ready
Azbill |
Mueller |
![]()
Post
#16
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
okay....so far so good....with car off, ignition on, I was able to trigger the FI points with my new circuit while on the workbench (had 20 feet of wire going from the car to the workbench to complete the circuit (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif) )
hope I didn't damage the coil or regular points since I forgot to unplug the hot wire going to the coil......... I just finished installing the new optic sensors in the distributor, it's ugly right now, but if it works successfully I'll redesign it and make it nicer looking. For now I'm going to run the resistors and transistors on the outside of the distributor in a small box until I can figure out a nice clean method of installing them inside the distributor. No modifications to the motor or wiring harness needs to be done except for the normal wiring of the new distributor. Attached image(s) ![]() |
Mueller |
![]()
Post
#17
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
the wheel is made from brass, I broke the delrin wheel I made and this was easier to fabricate.
total cost was less than $10 for sensors and trigger wheel.... |
TheCabinetmaker |
![]()
Post
#18
|
I drive my car everyday ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,304 Joined: 8-May 03 From: Tulsa, Ok. Member No.: 666 ![]() |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) Keep at it Mike. We all want a better alternative for our FI diz's
|
McMark |
![]()
Post
#19
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,179 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
Next make a MAP adaptor to replace the MPS and you'll single-handedly revive D-Jet. (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
Great stuff Mike. |
Mueller |
![]()
Post
#20
|
||
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None ![]() ![]() |
I need my brain examined, I have no idea why I'm playing with the D-Jet stuff when I have a known good working Megasquirt sitting in my garage (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) |
||
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 28th June 2024 - 04:44 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |