![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
yello914 |
![]()
Post
#1
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago and have also been commercial clear anodized for added finish protection. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door. Sets are sold for $150 (shipping included). This includes all four pieces. Will ship worldwide. This post has been edited by yello914: Feb 1 2012, 12:26 AM Attached image(s) ![]() |
![]() ![]() |
yello914 |
![]()
Post
#2
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
ITEMS ARE STILL AVAILABLE
|
kconway |
![]()
Post
#3
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California ![]() |
Bumpin this up just in case. I've seen these and the fit and finish is fantastic.
Kevin |
yello914 |
![]()
Post
#4
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
Bumpin this up just in case. I've seen these and the fit and finish is fantastic. Kevin Thanks for the positive feedback Kevin (IMG:style_emoticons/default/thumb3d.gif) |
kconway |
![]()
Post
#5
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California ![]() |
Can I get these in a black powdercoat finish?
Kevin |
yello914 |
![]()
Post
#6
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
|
kconway |
![]()
Post
#7
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California ![]() |
|
yello914 |
![]()
Post
#8
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
Can I get these in a black powdercoat finish? Kevin What finish are you looking for? Flat, Satin, Gloss ?? I think satin would probably match the plastic pieces the best. Kevin, for cost effective reasons, I will need to check with my plater to see if he is willing to add a couple of sets to an upcoming "black-satin finish" run. I'm waiting on a bunch of sets I sent out to be clear anodized so I will follow up with him in the morning and will keep you posted. Thanks again for your inquiry. RP |
kconway |
![]()
Post
#9
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California ![]() |
Cool, let me know. You getting the "silver car" together yet? By the way, was that a silver metallic paint? I'd like to get Pony to give me an estimate on body and paint work. My car is Alaska Blue Metallic and I heard metallics are a little tougher to spray.
Kevin |
yello914 |
![]()
Post
#10
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
Cool, let me know. You getting the "silver car" together yet? By the way, was that a silver metallic paint? I'd like to get Pony to give me an estimate on body and paint work. My car is Alaska Blue Metallic and I heard metallics are a little tougher to spray. Kevin Silver project is currently on hold as we prep an original 1973 2.0 for this weekends Porsche swap meet in Costa Mesa. You may want to take a look at this car as it is nearly unmolested and in excellent shape. I have all the original paperwork (service records, original window sticker, purchase agreement from Rusnak Porsche in Pasadena and so on). Color is Delphi Green with black interior). This car looks like it's been sitting in a time capsule (no cracks or rips in the interior and the paint is original not a respray). RP |
bd1308 |
![]()
Post
#11
|
Sir Post-a-lot ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,020 Joined: 24-January 05 From: Louisville,KY Member No.: 3,501 ![]() |
Still available?
|
Luke M |
![]()
Post
#12
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,385 Joined: 8-February 05 From: WNY Member No.: 3,574 Region Association: North East States ![]() ![]() |
Send me a pm when these become available for sale. Thanks,
Luke |
dr914@autoatlanta.com |
![]()
Post
#13
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,033 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None ![]() |
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items. Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door. Sets are sold for $150 plus shipping. This includes all four pieces. Will ship worldwide. Truly a fabulous product and highly recommended. We will post some pictures as we install a set on the 916!!!! |
yello914 |
![]()
Post
#14
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items. Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door. Sets are sold for $150 plus shipping. This includes all four pieces. Will ship worldwide. Truly a fabulous product and highly recommended. We will post some pictures as we install a set on the 916!!!! Thanks for the compliment and your recommendation Dr. 914 ! (IMG:style_emoticons/default/biggrin.gif) |
RSWannabe |
![]()
Post
#15
|
Newbie ![]() Group: Members Posts: 47 Joined: 20-August 06 From: Kirkland, WA Member No.: 6,692 ![]() |
Do you have these available now? I need a set for my six rebuild.
|
woobn8r |
![]()
Post
#16
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 607 Joined: 7-January 07 From: Newmarket, Ontario, Canada Member No.: 7,435 Region Association: None ![]() |
Any more Black Satin sets available?
Please PM me if they are (or will be) Cheers, Sean |
yello914 |
![]()
Post
#17
|
Member ![]() ![]() Group: Members Posts: 67 Joined: 18-May 05 From: Southern California Member No.: 4,099 Region Association: None ![]() |
I'm hoping to have complete sets available in a week or so.
The plater I've used in the past has been lagging and has promised to have them ready in a week. I will keep you all posted - Thank you all for being patient! yelo914 |
kconway |
![]()
Post
#18
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California ![]() |
Rudy,
I never heard back from you whether or not the black satin powdercoat is available and at what cost. Any info on that? Kevin |
turbo914v8 |
![]()
Post
#19
|
Member ![]() ![]() Group: Members Posts: 373 Joined: 26-July 03 From: Canada Member No.: 952 ![]() |
|
burton73 |
![]()
Post
#20
|
burton73 ![]() ![]() ![]() ![]() Group: Members Posts: 3,632 Joined: 2-January 07 From: Los Angeles Member No.: 7,414 Region Association: Southern California ![]() ![]() |
I still need a set for my 914-6 if you have me on the list.
Bob Burton burtonplastics@aol.com |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 7th September 2024 - 05:34 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |