 will 911 window cranks fit my 914?, considering my options... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jk76.914 |
 Sep 21 2009, 03:13 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 809 Joined: 12-April 05 From: Massachusetts Member No.: 3,925 Region Association: North East States  |
Does anyone know if the '66-'77 911 window cranks will fit the spline of my '76 window regulator? I'm in the home stretch on my interior assembly, and looking at options.
Thanks! Jim  |
   |
 
|
  |
Replies(1 - 7)
| JWest |
Sep 21 2009, 07:48 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,662 Joined: 6-January 03 From: Fort Worth, TX Member No.: 97 Region Association: None 
|
QUOTE(jk76.914 @ Sep 21 2009, 04:13 AM)  Does anyone know if the '66-'77 911 window cranks will fit the spline of my '76 window regulator? I'm in the home stretch on my interior assembly, and looking at options. Thanks! Jim Yes, and you need to use the screw from the 911 also. |
|
|
|
| jk76.914 |
Sep 21 2009, 09:36 PM
Post
#3
|
|
Senior Member Group: Members Posts: 809 Joined: 12-April 05 From: Massachusetts Member No.: 3,925 Region Association: North East States |
Thanks. I'll try and pick up a used one, with the cover, and see how she looks.
Jim |
|
|
|
| jk76.914 |
Oct 5 2009, 07:39 PM
Post
#4
|
|
Senior Member Group: Members Posts: 809 Joined: 12-April 05 From: Massachusetts Member No.: 3,925 Region Association: North East States |
UPDATE UPDATE UPDATE!!!!!!
I picked up a pair of the earlier style chrome base type, with the plastic cover. And well, THE SPLINE DIDN'T FIT!!! But the good news is, the screw did!! So I was able to get it to work. The spline has the correct number of teeth- 12, and the major diameter is correct. It's the minor diameter (the ID over the teeth) that is too small. So I drilled it out. Use a 27/64" drill bit, and drill down to the shoulder at the bottom of the spline. Then use a 7/16" bit and drill about 3/16" down into the spline. Last step- take a tiny triangular file and clean up the burrs covering the splines, and sharpen them while you're at it. Takes a few test fits and more filing, but it'll eventually fit. I like it. Picture below-  |
|
|
|
| GeorgeRud |
Oct 5 2009, 10:01 PM
Post
#5
|
|
Advanced Member Group: Members Posts: 3,725 Joined: 27-July 05 From: Chicagoland Member No.: 4,482 Region Association: Upper MidWest |
Looks nice! Thanks for the head's up on how to modify them for fit.
|
|
|
|
| Sleepin |
Oct 5 2009, 10:29 PM
Post
#6
|
|
Advanced Member Group: Members Posts: 3,647 Joined: 20-November 07 From: Grand Junction, Co. Member No.: 8,357 Region Association: Rocky Mountains |
Looks good as well! Is there enough left of the splines to last rolling the windows up and down a few times?
|
|
|
|
| Mark Henry |
Oct 6 2009, 07:25 AM
Post
#7
|
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
The 914 cranks are standard VW bug and can be picked up at a bug shop for about $4 each new.
|
|
|
|
| jk76.914 |
Oct 6 2009, 08:10 PM
Post
#8
|
|
Senior Member Group: Members Posts: 809 Joined: 12-April 05 From: Massachusetts Member No.: 3,925 Region Association: North East States |
QUOTE(Mark Henry @ Oct 6 2009, 09:25 AM) The 914 cranks are standard VW bug and can be picked up at a bug shop for about $4 each new. Not sure your point. I have a set, with Hella logo cast in even. They're pretty junky, even though they're brand new. The 911 piece is the same size (perspective makes it look smaller in the picture), but the combination of chrome and black, plus the fact that the handle is more substantial looking, gives it a more deluxe look in my eyes, and it fits with the black/chrome combo in the door handle. To each his own.   |
|
|
|
|
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th December 2024 - 07:32 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.