 Accelerator will not return to idle |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Jul 17 2008, 09:24 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
I have weber 40 idf carbs with a bugpack linkage. Is there supposed to be a spring on the accelerator pedal that returns the pedal idle or are the springs on the carbs the only springs to return the pedal to idle?
Thanks again- Steve |
   |
 
|
  |
Replies
| rebelmdot |
Jul 17 2008, 09:40 PM
Post
#2
|
|
914ini Group: Members Posts: 224 Joined: 25-January 08 From: Tennessee Member No.: 8,625 Region Association: South East States |
Spring on Carb is the only one. I had similar problem and had to get a heavy duty spring to accomplish the idle release that I wanted. If you want, I can take a picture of what I did.
|
|
|
|
Posts in this topic
tornik550 Accelerator will not return to idle Jul 17 2008, 09:24 PM
tornik550
Spring on Carb is the only one. I had similar pr... Jul 18 2008, 07:29 AM rebelmdot I made that little piece to accomodate the large s... Jul 18 2008, 07:51 AM tornik550
I made that little piece to accomodate the large ... Jul 18 2008, 08:18 AM
SGB I have Webers, but use 3 springs; one at the end o... Jul 17 2008, 09:54 PM jmill He's got a single and you have duals. If you ... Jul 18 2008, 08:38 AM Cap'n Krusty Too much spring can be worse, for the car, than no... Jul 18 2008, 08:59 AM rebelmdot Cap'n, I am relatively new to this, and I did ... Jul 18 2008, 09:37 AM rhodyguy :agree: x2 w/the cap'n on this one. the cable ... Jul 18 2008, 11:20 AM davep The pedal itself should provide some spring action... Jul 18 2008, 11:33 AM Vacca Rabite The Weber tech manual for VW applications suggests... Jul 18 2008, 11:48 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 01:42 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.