 it takes a village(or at least a non-club), 2.0 rebuild |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nycchef |
 Jul 19 2008, 04:06 PM
Post
#1
|
|
mechanical moron  Group: Members Posts: 952 Joined: 28-November 05 From: new york city n.y. Member No.: 5,202 Region Association: None  |
o.k i hope you are all sitting down. good ....let us begin.
i am starting to rebuild a 2.0 engine. those of you who know me know that this is like teaching a monkey to fly the space shuttle. so i hope you are all up tp the task. firstly i want to do the important stuff, so am i am gonna repaint the tins and the fan housing (this way, if it never runs it'll look good) cleaned them up, rubbed them down with denatured alcholol, light sanding and am ready to prime. gonna use duplicolor primer and paint. have heard that i should bake them ( have big ovens here, may make my next lasagna taste like a 914,but i'll live with that) but the real question is what colors, high gloss or matte, plaid or stripes, lets go guys give me your ideas, show pics of whats already been done (go easy on the photoshop i believe everythig i see) o.k this is gonna be fun andwhen it's over we will have a new 2.0 we can be proud of...at least i will p.s. my money is on the monkey (IMG:style_emoticons/default/bye1.gif) |
   |
 
|
  |
Replies
| StratPlayer |
Jul 19 2008, 08:05 PM
Post
#2
|
|
StratPlayer Group: Members Posts: 3,299 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains 
|
 Sears sells a neat powder coating gun,, http://www.sears.com/shc/s/p_10153_12605_0...00P?vName=Tools. I bought one an did all the tin of the engine that I rebuilt. Check my blog for some pictures. I you have an oven like a stove oven you can fit all your tin into the oven with no problems. I just finished up doing some pieces that I'm going to use on my next engine which I will start to build in the next to weeks. Powder coating is easy, the hard part if the prep work on the pieces that you want to coat.Heres some pics of some pieces that I did this afternoon: Attached image(s)  
|
|
|
|
| nycchef |
Jul 19 2008, 09:10 PM
Post
#3
|
|
mechanical moron Group: Members Posts: 952 Joined: 28-November 05 From: new york city n.y. Member No.: 5,202 Region Association: None |
QUOTE(StratPlayer @ Jul 19 2008, 06:05 PM)  Sears sells a neat powder coating gun,, http://www.sears.com/shc/s/p_10153_12605_0...00P?vName=Tools. I bought one an did all the tin of the engine that I rebuilt. Check my blog for some pictures. I you have an oven like a stove oven you can fit all your tin into the oven with no problems. I just finished up doing some pieces that I'm going to use on my next engine which I will start to build in the next to weeks. Powder coating is easy, the hard part if the prep work on the pieces that you want to coat.Heres some pics of some pieces that I did this afternoon: those are beautiful. did you use a gas oven? |
|
|
|
Posts in this topic
nycchef it takes a village(or at least a non-club) Jul 19 2008, 04:06 PM
ThinAir If you've got an oven that's large enough ... Jul 19 2008, 05:36 PM
nycchef
If you've got an oven that's large enough... Jul 19 2008, 05:41 PM ThinAir I've never done it, but there are several on t... Jul 19 2008, 05:47 PM ThinAir
I've seen it demonstrated on those hot-rod sh... Jul 19 2008, 09:24 PM vsg914 The tin was powder coated from the factory. The pa... Jul 19 2008, 06:33 PM nycchef
The tin was powder coated from the factory. The p... Jul 19 2008, 06:50 PM r_towle Factory tin was baked on enamel paint, not powder ... Jul 19 2008, 07:00 PM nycchef
Factory tin was baked on enamel paint, not powder... Jul 19 2008, 07:58 PM Mikey914 The benefit of using a shop is that they can strip... Jul 19 2008, 09:32 PM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 03:27 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.