 Injector Tube Torque?, Never Trust Haynes? I've heard.. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 7275914911 |
 Sep 24 2008, 07:32 PM
Post
#1
|
|
Hummmm!!!  Group: Members Posts: 756 Joined: 7-May 08 From: Mid-South Member No.: 9,028 Region Association: South East States 
 |
So I'm checking with the resident mechanics or anybody else that knows off the top of their head..
4-13mm nuts on base of each tube. Thx in advance for all replies.. jkp |
   |
 
|
  |
Replies
| ArtechnikA |
Sep 24 2008, 07:51 PM
Post
#2
|
|
rich herzog Group: Members Posts: 7,390 Joined: 4-April 03 From: Salted Roads, PA Member No.: 513 Region Association: None |
QUOTE(7275914911 @ Sep 24 2008, 09:32 PM)  So I'm checking with the resident mechanics or anybody else that knows off the top of their head.. 4-13mm nuts on base of each tube. Not trying to be excessively anal-retentive but there is a BIG difference between a 13mm nut and a 13mm ATF nut ... So I'm assuming these are actually M8 fasteners. Virtually every M8 fastener gets 2,5mKp torque. call it 18 lbs-ft. |
|
|
|
| 7275914911 |
Sep 24 2008, 08:35 PM
Post
#3
|
|
Hummmm!!! Group: Members Posts: 756 Joined: 7-May 08 From: Mid-South Member No.: 9,028 Region Association: South East States
|
QUOTE(ArtechnikA @ Sep 24 2008, 08:51 PM) QUOTE(7275914911 @ Sep 24 2008, 09:32 PM) So I'm checking with the resident mechanics or anybody else that knows off the top of their head.. 4-13mm nuts on base of each tube. Not trying to be excessively anal-retentive but there is a BIG difference between a 13mm nut and a 13mm ATF nut ... So I'm assuming these are actually M8 fasteners. Virtually every M8 fastener gets 2,5mKp torque. call it 18 lbs-ft. They are M8 as you say. I use my 13mm socket. Thanks for torque info. |
|
|
|
Posts in this topic
7275914911 Injector Tube Torque? Sep 24 2008, 07:32 PM
jk76.914 Depends on what the mating thread it. If it's... Sep 24 2008, 08:40 PM 7275914911
Depends on what the mating thread it. If it... Sep 24 2008, 10:32 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th June 2024 - 04:48 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.