 New Fuel Pump! No power... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| slim72914 |
 Oct 1 2008, 09:40 PM
Post
#1
|
|
Member  Group: Members Posts: 153 Joined: 4-July 07 From: Mesa, AZ Member No.: 7,874  |
Hey all. I recently finished my new fuel pump install and relocate to the front under the fuel tank. Got it running and all tuned in and then it just stopped pumping... No power. I checked the factory wires where I tapped in to them to extend the wiring to the front and there is no power even before the area where I soldered my connector in. Is there an easy way to check the relay? I tried switching it with one of the other ones in the board (dont remember which one but it had the same part#) and it still did not turn the pump on. Any help??? Thanks all.
|
   |
 
|
  |
Replies
| dbgriffith75 |
Oct 2 2008, 10:12 PM
Post
#2
|
|
TheGrif Group: Members Posts: 509 Joined: 25-July 07 From: Iowa, USA Member No.: 7,945 Region Association: Upper MidWest |
QUOTE Those are the correct fuses but it is the 25 that is associated with the fuel pump. I've never been able to figure out what the 8 amp was for. It only shows in early wiring diagrams and seems to be wired to pin 9 of the 12 pin plug. None of the wiring diagrams (at least that I have found) show anything attached to 9 so it must be an option. Maybe aircon or sportomatic? In any case you probably don't need the 8. Correct me if I'm wrong, but isn't the 12 pin connector the power supply to the board? |
|
|
|
Posts in this topic
slim72914 New Fuel Pump! No power... Oct 1 2008, 09:40 PM
r_towle turn on your headlights.
If the headlights go up a... Oct 1 2008, 09:41 PM
slim72914 Nice! put new fuses in... Fuel pump comes on... Oct 1 2008, 09:52 PM swl Those are the correct fuses but it is the 25 that ... Oct 2 2008, 06:12 PM swl generally speaking the 12pin is carrying stuff to ... Oct 3 2008, 07:37 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 11:13 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.