![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
rfuerst911sc |
![]()
Post
#1
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,158 Joined: 4-May 06 From: Dahlonega , Georgia Member No.: 5,980 Region Association: South East States ![]() |
I'm getting my car stripped down to get ready for paint (IMG:style_emoticons/default/piratenanner.gif) Today I removed the targa roof and removed all the side weatherstripping and pads on the targa bar and removed the back glass. But when I went to remove the front targa pad I couldn't get it off (IMG:style_emoticons/default/sad.gif) I removed 10 ( I think ) screw caps 5 on the bottom and 5 on the front. I then removed 5 screws on the bottom but couldn't seem to get a phillips screwdriver to engage the screws in the front of the pad. Are there phillips screws in there? I assume the pad comes off and the rear targa latches stay in place?
|
![]() ![]() |
rfuerst911sc |
![]()
Post
#2
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,158 Joined: 4-May 06 From: Dahlonega , Georgia Member No.: 5,980 Region Association: South East States ![]() |
Well the good news is I got the pad off (IMG:style_emoticons/default/piratenanner.gif) The bad news is it is now toast (IMG:style_emoticons/default/sad.gif) It wasn't in great shape to begin with and some angry twisting,swearing didn't help it any (IMG:style_emoticons/default/biggrin.gif) So I guess I now need another (IMG:style_emoticons/default/blink.gif) That will wait until after the repaint. I think when I do get another pad I may slide some small tubes in the holes and clean out any foam that is obstructing the view of the screwheads. (IMG:style_emoticons/default/beerchug.gif)
|
Lou W |
![]()
Post
#3
|
"Here Kitty Kitty" my ass...... ![]() ![]() ![]() ![]() Group: Members Posts: 4,109 Joined: 9-May 04 From: Roseburg, OR. Member No.: 2,039 Region Association: Spain ![]() |
Well the good news is I got the pad off (IMG:style_emoticons/default/piratenanner.gif) The bad news is it is now toast (IMG:style_emoticons/default/sad.gif) It wasn't in great shape to begin with and some angry twisting,swearing didn't help it any (IMG:style_emoticons/default/biggrin.gif) So I guess I now need another (IMG:style_emoticons/default/blink.gif) That will wait until after the repaint. I think when I do get another pad I may slide some small tubes in the holes and clean out any foam that is obstructing the view of the screwheads. (IMG:style_emoticons/default/beerchug.gif) That's how I got mine off too. (IMG:style_emoticons/default/biggrin.gif) (IMG:style_emoticons/default/sawzall-smiley.gif) |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 25th June 2024 - 11:24 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |