Suby-engined rustoration, 21-Sep-2024 update: more racing-related carnage! Options

[strawman]

Hi All --

This is my second post, but I've been lurking on this fine website for a while now. I've wanted a 914 since I was in high school, but always seemed to stumble upon other projects... until recently.

My neighbor gave me this 1973 Porsche 914 about a month ago. He told me he blew a head gasket and parked it in his parents' driveway in 1992. When his parents finally told him to move it or they were calling a local junkyard, he offered it to me since he knows I'm a gearhead. In for a penny, in for a pound...

I hauled it home, knowing that it has some rust issues in the battery area and rear trunk. But it appears to have never been in a wreck and it is complete. It turns out that an exhaust stud pulled, so he coulda fixed it for a couple hundred and probably kept another 914 from languishing but I guess all things happen for a reason (namely, so I would undertake this project!).

I sold the engine to a local Craigslister for use in his Meyers Manx dune buggy, and bought a wrecked but running 1993 Subaru Legacy turbo wagon. This is the closed-deck 2.2 liter engine, and 250 hp is easy with boost control and an open exhaust. I've already done a Subaru into a VW Vanagon and my daily driver is a 1992 Suby Legacy, so this won't be too much of a stretch for me. I plan to use the Suby 5-speed transmission (out of a 1998 Suby Forester) with the Aussie-sourced RWD elimination coupler and custom-mated 914/Suby axles.

I've got a suburban home with a crowded two-car garage (my 125 shifter kart and my daughter's FJA kart will likely get lonely!), a MIG welder, and a wide assortment of air/power/hand tools -- so the adventure begins! This project will likely take a year to finish, so please be patient.

I've attached some pics of the car as found in the driveway, some rust areas and the rear trunk repairs I've started. I'll chronicle the build as I go, so feel free to chime in!

Geoff

[strawman]

I sandblasted the entire inner long to get down to bare metal. Since I'm using a water cooled Suby engine, I have removed the stock heater tubes. Here are some pics of the long without the tube, including the lower rear patch panel.





In the pic below, note the new lower seat belt attachment -- I pulled my hair out trying to find a tap to chase the threads after welding it in... until I realized that it is not metric (D'oh!). You'll also note the piece welded in behind the jack post. I sandwiched 16ga and 18ga sheetmetal to equate to the two pieces of 17ga used by the factory in that area, and bent it to fill in the rusty outer piece. I neglected to take a pic of the masterful (if I do say so, myself!) piece I hammered out to replace the compound bend where the long makes the swoop up toward the rear.