Running Problems, 3 and 4 are not firing |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Running Problems, 3 and 4 are not firing |
solex |
Jan 19 2009, 08:38 PM
Post
#1
|
Senior Member Group: Members Posts: 789 Joined: 12-January 05 From: Long Island, NY Member No.: 3,439 Region Association: North East States |
Hi All,
Just got around to starting the car after a top end rebuild. I replaced all of the electrics but it appears that 3 & 4 are not firing any suggestions would be appreciated. The only thing I did not replace was the condenser (rotor, cap, plugs, wires-magnecore) If it is injector related what is the safest way to check? Thank you, Dan |
r_towle |
Jan 19 2009, 11:08 PM
Post
#2
|
Custom Member Group: Members Posts: 24,624 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Could be the FI trigger points in the distributor.
Could be the wiring (may have put the wires on the wrong injectors) Could be the ground for the injectors (under the plenum, top case bolt...white wires on a star spade mount) To start with, flip the wiring, one injector for the other. Obviously check your fuel routing and fuel pressure. Check your spark by grounding out a plug. Rich |
SirAndy |
Jan 19 2009, 11:42 PM
Post
#3
|
Resident German Group: Admin Posts: 41,815 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
|
Lo-Fi Version | Time is now: 25th September 2024 - 10:50 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |