 Dwell increasing with RPMs |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Ferg |
 Aug 24 2009, 11:37 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 5,948 Joined: 8-January 03 From: Boulder CO Member No.: 116 Region Association: None 
 |
Dwell is 49 at idle, jumps to 50 just off idle and goes all the way to 53 at full advance (3500 rpms), advance and retard hoses were hooked up for dwell check, I know to unhook them for timing. Is that right, or do I need to unhook them for dwell, as well.
Possible dizzy advacing plate issue? Car has a miss at 3kish, I'm trying to squash. Stock 74 2.0 djet. timing is set at 29. |
   |
 
|
  |
Replies
| Cap'n Krusty |
Aug 25 2009, 09:22 AM
Post
#2
|
|
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
Worn out breaker plate. The condenser, BTW, cannot and does not have anything to do with dwell.
The Cap'n |
|
|
|
| Ferg |
Aug 25 2009, 09:28 AM
Post
#3
|
|
914 Guru Group: Members Posts: 5,948 Joined: 8-January 03 From: Boulder CO Member No.: 116 Region Association: None
|
QUOTE(Cap'n Krusty @ Aug 25 2009, 07:22 AM)  Worn out breaker plate. The condenser, BTW, cannot and does not have anything to do with dwell. The Cap'n Thanks Cap'n, just got off the phone with my local wrench and that was what he said as well. Are they still available? Or do I need to start looking for a used dizzy Also, in the short term should I lower the dwell to 45ish, so when it jumps it stays in range, will that help? |
|
|
|
Posts in this topic
Ferg Dwell increasing with RPMs Aug 24 2009, 11:37 PM
brant thats weird
I'll let the experts jump in
but ... Aug 24 2009, 11:45 PM Ferg Yes, strange indeed.
I did check gap again, seems... Aug 24 2009, 11:56 PM SLITS The points are a spring. If you activate the spri... Aug 25 2009, 08:40 AM
ME733
The points are a spring. If you activate the spr... Aug 25 2009, 08:56 AM jaxdream I've heard of circle track racers that run a M... Aug 25 2009, 09:06 AM Ferg These are brand new points (second set) and new co... Aug 25 2009, 09:10 AM ME733
Worn out breaker plate. The condenser, BTW, cann... Aug 25 2009, 06:45 PM Joe Sharp Hey Mikie, put some 30 weight on all the stuff bel... Aug 25 2009, 09:41 AM McMark Cap'n, what wears out on the breaker plate? D... Aug 25 2009, 03:25 PM Ferg reset the dwell to 45 tonight, and retimed it to 2... Aug 25 2009, 09:36 PM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 11:42 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.