'Cooling flaps' in top of engine tin, Cable activated? How do these function? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
'Cooling flaps' in top of engine tin, Cable activated? How do these function? |
johnnie5 |
Feb 6 2009, 01:38 PM
Post
#1
|
914 lover Group: Members Posts: 375 Joined: 14-October 08 From: San Diego, CA Member No.: 9,644 Region Association: Southern California |
Just as the title states....
When I was dressing my new motor I noticed these 'reverse' flaps. But have no idea what cable would hook up to the flapper arm, or where it would come from? Or what would activate it? Someone please enlighten me... |
ME733 |
Oct 12 2009, 12:18 PM
Post
#2
|
Senior Member Group: Members Posts: 842 Joined: 25-June 08 From: Atlanta Ga. Member No.: 9,209 Region Association: South East States |
(IMG:style_emoticons/default/popcorn[1].gif) ..well ..NOT having any air flaps. Diverters at all.....will not effect air going over the oil cooler....the air is pressurized..and as such WILL equalize in the sheetmetal back to front and go over the cylinders and oil cooler and out. I have never had ANY repeat ANY oil cooling problems , by removing ALL the crap that is in the way, of restricting air flow to the cylinders..(.THE DAMN FLAPS.) The engine , cools ,revs better as the compacted air has less restriction, and or cavation.(compacting air to the point that air flow virtually ceases) . When your cast aluminum fan blows up (as some one in a recient post had )...it is due from the force , restriction, cavation, to such a degree that the AIR PRESSURE will break aluminum fins off the air impeller/blower. This is why the racers who turn ..LOTS of rpm,s remove fan blades. To prevent cavation. to keep air flow going at extreme rpm,s. Porsche race cars solved the problem by having air blowers/ fans, with FEWER blades... all that force , of air inside the air housings, against the fan blades ALSO COSTS HORSEPOWER, Now with all this said I do not build engines for people that sit in traffic, for hours, and turn only 3500 rpms. with 10-w-30-oil., ,.I.M.E. no flaps - no problem. However; If there are those owners of 914s who want their cars to be totally stock as relates to air diverters, flappers and are concerned that modofications MAY affect the cooling of their engine then please disreguard ALL the information in this post. By all means do it your way.It,s your money, and time. (IMG:style_emoticons/default/popcorn[1].gif)
|
SirAndy |
Oct 12 2009, 12:47 PM
Post
#3
|
Resident German Group: Admin Posts: 41,813 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
(IMG:style_emoticons/default/popcorn[1].gif) ..well ..NOT having any air flaps. Diverters at all.....will not effect air going over the oil cooler....the air is pressurized..and as such WILL equalize in the sheetmetal back to front and go over the cylinders and oil cooler and out. Least resistance... The path over the cylinders and out the bottom is much less restrictive than the path through the small cavities in the oil cooler. I doubt you get any decent air flow through the oil cooler that way. It might work on your race car for short run sessions, but it won't work for a daily driver. Heck, i know of one AX 914 that does not run any cooling at all, no tin, no fan, no shroud, nada. It still does have the stock oil cooler with a 12V computer housing fan providing "air flow". Works great on 60 second runs. (IMG:style_emoticons/default/shades.gif) Andy |
Lo-Fi Version | Time is now: 24th September 2024 - 01:02 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |