My chassis twisted hardcore Options

[turnaround89]

I braced the chassis, but obviously not enough. I lined the doors up properly, had the gaps correct, and then put the braces in. I took the braces out today, and went to test fit the passenger door and it won't even come close to shutting. the door lock does not line up, i tried adjusting the hinges but had no luck. The things are way off....any one have a fix? I really don't want to buy a tub because i just put a ton of work into this one. If it comes down to buying a tub, i guess thats what ill have to do, but i really would like to avoid that.

[turnaround89]

I welded in clamshells over the longs and also put in new inner longs as well. The passenger door sits about 3/4" low at the back. The strikers are then that far off as well. I have tried pulling up on the bottom of the door, however, if i pull up too much the triangular window will just make contact with the windshield frame. ill try to get some pictures tomorrow. The door sits really low.

Shims in the bottom may help a little, but once again, too many and the window will make contact with the windshield frame. Im really excited that the chassis is super rigid, but i don't like not being able to shut my doors.