External Oil Cooler, let me see some pictures Options

[tradisrad]

I am going to install my 25 row Earls oil cooler over the 4th of july and I am looking for some more ideas, tip and tricks.

I plan on using a wafer adapter to keep my filter in the stock location. I will also install a thermostat and a fan. I will most likely mount it under the rear trunk.

I'd like to see some pictures of what others have done. Experinces on the wafer adapter vs relocating the oil filter and what thermostats are being used. I've seen the Pelican Article.

thanks
-Rob

[McMark]

Those adapters will all work, but space is tight, both in relation to the engine parts (oil cooler) and the engine mount bar. The second adapter may put the filter down too low, and I don't like the built in thermostat.

I've bought Setrab parts from Livermore Performance. The 119 cooler is the one I've used a few times and it's $160 from them.

[qa1142]

Those adapters will all work, but space is tight, both in relation to the engine parts (oil cooler) and the engine mount bar. The second adapter may put the filter down too low, and I don't like the built in thermostat.

I've bought Setrab parts from Livermore Performance. The 119 cooler is the one I've used a few times and it's $160 from them.

yes but $110 more $272 with the fan... are Setrab that much better than Derale if I am just running on street with some autoX?