Dual carb air filter housing, like the old /6 air filters Options

[VaccaRabite]

A few years ago, I saw someone make an air filter housing for a dual carbed /4 that was similar to the old air filter housings for a /6. you know, this style:
(IMG:http://www.914world.com/bbs2/uploads_offsite/forums.pelicanparts.com-179-1281985157.1.jpg)

In my continuing effort to quiet down my ride, I need to reduce the sound of my intake. Also, this would allow me to use a proper paper filter rather then the kinda craptastic K&N filters - which seem to be the only game in town if you are using dual carbs.

Anyone?

Zach

[veltror]

The red one pictured is from Klaus tuning pretty good product but also look at this towards the end of the page, this is what i would do if I went Carbs...


Luftfilter


(IMG:style_emoticons/default/smilie_pokal.gif) (IMG:style_emoticons/default/smilie_pokal.gif) (IMG:style_emoticons/default/smilie_pokal.gif)

[SirAndy]

this is what i would do if I went Carbs...

(IMG:style_emoticons/default/idea.gif)

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.gwd-weiser.de-179-1281987729.1.jpg)

[tomeric914]

this is what i would do if I went Carbs...

(IMG:style_emoticons/default/idea.gif)

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.gwd-weiser.de-179-1281987729.1.jpg)

BTDT. That setup was going for something like $1200 about 10 years ago. Nice looking but expensive.

Volks Authority in San Jose carried them but I think that shop went out of business. They imported them from CSP. They have a few different setups to choose from but they start at 728 Euros

http://www.csp-shop.de/cgi-bin/cshop2/fron...sort=0&all=

(IMG:http://www.914world.com/bbs2/uploads_offsite/www.csp-shop.de-9101-1281988858.1.jpg)

I made my own setup for my Baja with a centrifugal air cleaner setup. You could probably use all of the pieces except the centrif filter and put a K&N filter on it. Here's a pic found elsewhere in this forum of my setup.

http://www.914world.com/bbs2/index.php?s=&...t&p=1170158

Just the pair of aluminum pieces that go in the CB filter setup cost $200 to have made up. The rest of the boots and pipe were another $80. PM me if those will work for you.