 Shifter bushings |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| partwerks |
 Sep 3 2010, 02:05 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,593 Joined: 7-September 06 From: Grand Island, NE Member No.: 6,787  |
My mechanic said there is about an 1/8" slop in the ball and cup bushing. Would that translate to some of the poor shifting?
Also, another bushing that the rod goes through in the back. He said it appears that it is a bronze bushing? Anyone know what that particular one would be called? |
   |
 
|
  |
Replies
| maf914 |
Sep 3 2010, 02:56 PM
Post
#2
|
|
Not a Guru! Group: Members Posts: 3,049 Joined: 30-April 03 From: Central Florida Member No.: 632 Region Association: None 
|
The cup-like bushing at the transmission is a very snug fit when new. There is no noticeable play. Sounds like yours should be replaced.
The brass bushing at the rear tranny console is probably a commonly available aftermarket type bushing which replaces the stock plastic bushing. |
|
|
|
Posts in this topic
partwerks Shifter bushings Sep 3 2010, 02:05 PM
windforfun I had my tranny bushing replaced a few weeks ago a... Sep 3 2010, 03:30 PM Drums66
I had my tranny bushing replaced a few weeks ago ... Sep 3 2010, 03:48 PM
Tom_T 914 shift bushings (each) & kits are readily a... Sep 3 2010, 03:33 PM Vacca Rabite I agree with Tom. If one is failing, chances are ... Sep 3 2010, 03:42 PM Cap'n Krusty You failed to tell us what car you have, always a ... Sep 3 2010, 05:53 PM maf914 If the bronze bushing is over sized for the rod di... Sep 5 2010, 04:00 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th June 2024 - 07:11 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.