 914 Subaru EG33 engine and WRX transaxle conversion, Finally finishing up |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BIGKAT_83 |
 Sep 8 2010, 07:56 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,798 Joined: 25-January 03 From: Way down south Bogart,GA Member No.: 194 Region Association: South East States 
 |
What started as quick and easy conversion for a Grassroots motorsports 2000 challenge car. One thing led to another and before I knew it I had gone over budget.
I started with a V8 car with a bad engine so instead of another SBC or LS1 I bought a wrecked Subaru SVX for the engine. Then found a wrx transaxle with axles clutch and all parts needed. The engine and transaxle mounts were done over a couple of weekends. Then we got real busy at work and was not able to work on it for a couple of months. By this time I had changed my mind about the grassroots challenge car and figured I just fix it up. So a color change paint job was in order. I did this myself in the garage and had to wait until spring to shoot the paint. I've been driving now for a few days tuning the Megasquirt DIYPNP that I built over the winter. I guess its time to go get a tag and start driving.        Bob (IMG:style_emoticons/default/driving-girl.gif) |
   |
 
|
  |
Replies
| strawman |
Nov 17 2010, 11:59 PM
Post
#2
|
|
Senior Member Group: Members Posts: 885 Joined: 25-January 08 From: Los Osos, CA Member No.: 8,624 Region Association: Central California
|
Hi Bob --
Did you use the stock Suby CV boot and stretch the smaller portion over the 911 axle shaft, or did you find a boot that has the OD of the 911 axle shaft and the OD of the Suby inner CV joint housing? I can't imagine that you had the machinist turn down the OD of the 911 axle shafts to fit the Suby CV boot... I'm getting ready to send my 911 axles off to Dutchman and would like to go with a proven design. Thanks in advance! Geoff |
 |
|
| BIGKAT_83 |
Nov 18 2010, 06:08 AM
Post
#3
|
|
Senior Member Group: Members Posts: 1,798 Joined: 25-January 03 From: Way down south Bogart,GA Member No.: 194 Region Association: South East States
|
QUOTE(strawman @ Nov 18 2010, 12:59 AM)  Hi Bob -- Did you use the stock Suby CV boot and stretch the smaller portion over the 911 axle shaft, or did you find a boot that has the OD of the 911 axle shaft and the OD of the Suby inner CV joint housing? I can't imagine that you had the machinist turn down the OD of the 911 axle shafts to fit the Suby CV boot... I'm getting ready to send my 911 axles off to Dutchman and would like to go with a proven design. Thanks in advance! Geoff I used the stock subaru rubber and it works fine on the axle. You can see it on the first page of the thread here. Bob |
|
|
|
| strawman |
Nov 18 2010, 10:15 AM
Post
#4
|
|
Senior Member Group: Members Posts: 885 Joined: 25-January 08 From: Los Osos, CA Member No.: 8,624 Region Association: Central California
|
QUOTE(BIGKAT_83 @ Nov 18 2010, 04:08 AM) I used the stock subaru rubber and it works fine on the axle. You can see it on the first page of the thread here. Bob Thanks! And congrats on 1000 posts... |
|
|
|
Posts in this topic
BIGKAT_83 914 Subaru EG33 engine and WRX transaxle conversion Sep 8 2010, 07:56 PM
qa1142 Way cool
Nice color too :trophy: Sep 8 2010, 08:03 PM kg6dxn The biggest area of debate with the Subi trans see... Sep 8 2010, 08:20 PM d914 for something that was to be a throw together, wow... Sep 8 2010, 08:32 PM Andyrew Nicely done!!!!
Yes What was your... Sep 8 2010, 09:58 PM strawman Very cool! I, too, am interested in details on... Sep 8 2010, 09:58 PM KELTY360 :trophy:
Very impressive! How are you runnin... Sep 8 2010, 10:28 PM
BIGKAT_83
:trophy:
Very impressive! How are you runni... Sep 9 2010, 01:19 AM rickthejetman
:trophy:
Very impressive! How are you runn... Sep 9 2010, 06:49 AM sawtooth
x2 Sep 23 2010, 01:27 PM andys Hey Bob, nice work. Looks like a stock factory ins... Sep 9 2010, 09:40 AM BIGKAT_83
Hey Bob, nice work. Looks like a stock factory in... Sep 9 2010, 09:59 AM Andyrew Bob,
Is that a cable shift? Care to share how yo... Sep 9 2010, 10:02 AM BIGKAT_83 Cable shifter for sure. I don't have any pictu... Sep 9 2010, 10:22 AM Andyrew Very nice looking shifter setup! Did you buy o... Sep 9 2010, 11:09 AM BIGKAT_83
Very nice looking shifter setup! Did you buy ... Sep 9 2010, 11:34 AM Andyrew
Very nice looking shifter setup! Did you buy... Sep 9 2010, 02:32 PM okieflyr Bob that is a really nice little sleeper, you shou... Sep 9 2010, 01:32 PM Drums66 ....Very well thought out...all the way live!
... Sep 9 2010, 02:45 PM d914 Toyota corolla shifter works eh? Gotta remember th... Sep 9 2010, 03:02 PM andys The MR2 shifter works out well because the cable b... Sep 9 2010, 03:52 PM barada
The MR2 shifter works out well because the cable ... Jan 8 2011, 04:32 PM partwerks
The MR2 shifter works out well because the cable ... Aug 15 2022, 08:03 PM BIGKAT_83 I did add a bell crank to reverse the shift moveme... Sep 9 2010, 04:18 PM Zaney :ttiwwp: :D
Especially, your tailshifter link... Sep 9 2010, 09:14 PM charliew tranny cable linkage pictures are in the thread Na... Sep 10 2010, 12:11 AM Zaney
tranny cable linkage pictures are in the thread N... Sep 10 2010, 12:51 PM ghuff http://www.914world.com/bbs2/uploads_offsite/image... Sep 10 2010, 08:08 AM d914 im also building a suby, but that ls1 with 400hp l... Sep 10 2010, 08:22 AM matthepcat I called Renegade Hybrids about Subaru motor and t... Sep 10 2010, 03:25 PM Andyrew Sounds like they are stealing all of my Audi trani... Sep 10 2010, 03:40 PM matthepcat Are the 2wd Audi transmissions a more viable optio... Sep 10 2010, 03:43 PM computers4kids
Sounds like they are stealing all of my Audi tran... Oct 9 2010, 04:59 PM BIGKAT_83
Sounds like they are stealing all of my Audi tra... Oct 9 2010, 05:35 PM Andyrew They are pretty strong and would be a good option ... Sep 10 2010, 04:09 PM charliew Check on rock crawler or offroad shops for resplin... Sep 24 2010, 01:17 PM sawtooth
Check on rock crawler or offroad shops for respli... Oct 20 2010, 11:22 AM nsyr I think a video of this car would be REALLY COOL... Sep 24 2010, 01:29 PM goodwood73 Bob,
I would like to replicate your setup, could y... Oct 9 2010, 02:05 PM silver74insocal
Bob,
I would like to replicate your setup, could ... Oct 9 2010, 02:50 PM BIGKAT_83
Bob,
I would like to replicate your setup, could ... Oct 9 2010, 04:54 PM BIGKAT_83 Got the engine out of the car now. I needed to cle... Nov 18 2010, 11:02 AM KELTY360
Got the engine out of the car now. I needed to cl... Jan 8 2011, 07:59 PM sawtooth
Got the engine out of the car now. I needed to cl... Jan 10 2011, 02:09 PM sawtooth dbl post Jan 10 2011, 02:09 PM Britain Smith Do you happen to have a picture of the thermostat ... Nov 18 2010, 11:15 AM BIGKAT_83
Do you happen to have a picture of the thermostat... Nov 18 2010, 11:23 AM d914 here is th straight neck thermosat housing..
Nov 18 2010, 03:02 PM BIGKAT_83 Sure do and the wheels worked out great. I have a ... Jan 8 2011, 07:25 PM barada
Sure do and the wheels worked out great. I have a... Jan 8 2011, 07:41 PM BIGKAT_83 The evaporator I'm using is a slimline underda... Jan 10 2011, 05:02 PM SpecialK You've got some serious skills my friend :wor... Jan 10 2011, 08:29 PM bfrymire
The evaporator I'm using is a slimline underd... Jan 10 2011, 09:40 PM d914 it ran the curves at the the "tail of the Dra... Jan 11 2011, 08:30 AM SpecialK
it ran the curves at the the "tail of the Dr... Jan 11 2011, 09:04 AM Brett W Bob, bring that sucker up here and we can drive so... Jan 11 2011, 09:26 AM BIGKAT_83 Driving at the TOD event I got 27mpg on 2 tanks. T... Jan 11 2011, 09:26 AM barada
Driving at the TOD event I got 27mpg on 2 tanks. ... Jan 11 2011, 09:42 AM SpecialK
Driving at the TOD event I got 27mpg on 2 tanks. ... Jan 11 2011, 09:45 AM BIGKAT_83
Driving at the TOD event I got 27mpg on 2 tanks.... Jan 11 2011, 09:58 AM SpecialK
[quote name='SpecialK' post='1416441' date='Jan 1... Jan 11 2011, 10:29 AM SpecialK
[quote name='SpecialK' post='1416441' date='Jan 1... Jan 11 2011, 10:32 AM SpecialK I would not worry about the pan. In my car its no... Jan 11 2011, 10:48 AM Mylesofsmyles WOW!!!!
This is my first post on ... Jan 11 2011, 08:12 PM SpecialK
WOW!!!!
This is my first post on... Jan 11 2011, 10:12 PM charliew Search a little guys there is a thread on the diy ... Jan 12 2011, 07:45 PM BIGKAT_83 I had planned to weld up my diff but bought a Bema... Jan 13 2011, 07:05 AM SpecialK Thanks for the link! :beer2: I think I'm... Jan 15 2011, 11:22 AM sawtooth Hey Bob, what gear oil are you using in your suby ... Jan 21 2011, 10:19 AM BIGKAT_83
Hey Bob, what gear oil are you using in your suby... Jan 21 2011, 01:31 PM JRust Any idea on the wieght of the EG33 complete with a... Jan 21 2011, 02:36 PM BIGKAT_83
Any idea on the wieght of the EG33 complete with ... Jan 21 2011, 06:38 PM JRust
I think the engine is 350lbs. I also have a EZ30 ... Jan 21 2011, 11:31 PM BIGKAT_83
I think the engine is 350lbs. I also have a EZ30... Jan 22 2011, 07:56 AM SpecialK
[quote name='JRust' post='1421051' date='Jan 22 2... Jan 22 2011, 03:24 PM SpecialK Probably not too far off with your 350lb. est., on... Jan 21 2011, 09:26 PM wobbletop Bob,
Very very nice car!
What did you do for ... Jan 22 2011, 11:57 PM bfrymire Forgive me for my ignorance about the SVX motor. ... Feb 23 2011, 08:32 PM BIGKAT_83
Forgive me for my ignorance about the SVX motor. ... Feb 24 2011, 12:59 AM bfrymire Great! Thanks for the info. Looks like I am ... Feb 24 2011, 01:38 AM 69dblcab Thanks for the info.
Where did you get your flywhe... Feb 25 2011, 06:09 PM BIGKAT_83
Thanks for the info.
Where did you get your flywh... Feb 25 2011, 06:40 PM bfrymire
Thanks for the info.
Where did you get your flywh... Feb 25 2011, 07:25 PM d914 I believe Bob started with my flywheel and then ch... Feb 25 2011, 07:53 PM charliew I like this thread and I'm gonna bump it becau... Jul 31 2016, 06:38 PM |
25 User(s) are reading this topic (25 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd November 2024 - 01:58 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.