 beetle CV flange weirdness |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mskala |
 Feb 21 2011, 02:45 PM
Post
#1
|
|
R  Group: Members Posts: 1,927 Joined: 2-January 03 From: Massachusetts Member No.: 79 Region Association: None 
 |
A while back I bought the modified type 1 CV's. Just getting to think
about installing. Look at the pic where the outside is machined down. (This is not the modification for 914, this picture is from online of normal type1 CV.)  I can't really show it with a picture, but the flange is built to the larger diameter, so it doesn't match with the machined area. This seems stupid. I guess when bolted down it should still retain the grease, but why is it like this? |
   |
 
|
Posts in this topic
Cap'n Krusty The boot goes on the other end of the joint. The ... Feb 21 2011, 03:06 PM
mskala But the other side has the recess for the gasket. ... Feb 21 2011, 03:22 PM Cap'n Krusty Modded CV parts are outside my field of expertise,... Feb 21 2011, 03:30 PM McMark The modified version is installed 'backwards... Feb 21 2011, 03:55 PM r_towle put the gasket on the boot side and sealant on the... Feb 21 2011, 04:34 PM McMark
l, then use locktite on the threads.
Rich
ACK... Feb 21 2011, 09:23 PM mskala I have never had one loosen as long as a new Schno... Feb 22 2011, 04:05 PM mskala Another similar thread made me look at the pic Chr... Feb 22 2011, 04:09 PM mskala Thanks all, I'm pretty sure these are the pmbp... Feb 21 2011, 08:03 PM Racer Chris :idea: Feb 22 2011, 06:43 PM  |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th December 2024 - 01:53 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.