 Fuel Pump will not run, Checked fuse, relay, etc |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BCinSC |
 May 29 2011, 08:42 AM
Post
#1
|
|
Nothing but Trouble  Group: Members Posts: 138 Joined: 8-June 03 From: Wakefield, MA Member No.: 800 Region Association: North East States  |
So Blanche ('73 White 914-4 1.7L) was running great last summer until she simply stopped on I-95 in Burlington, MA. Simply no spark anymore. Having no time to deal with it, she sat until today. I figured out the spark problem, but now the fuel pump, won't. Familiar with this type of issue, I open the relay board and check the fuse and the relay. I've got 12V where I'm suppose to - both sides of fuse, pin85 of FP relay when key on (FI Brain energizes to close circuit to join pin30 and pin87 I believe). PIN13 of connector closest to firewall, which diagram says goes out to FP itself, shows continuity to ground, so I'm guessing broken wire somewhere. Sounds reasonable/plausible? Fuel Pump was functional before I put her away.
|
   |
 
|
  |
Replies
| SLITS |
May 29 2011, 09:05 AM
Post
#2
|
|
"This Utah shit is HARSH!" Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None  |
Pumps do gum up or fail.
Run hot wire to + terminal and another to ground and see if the pump will run at all as a test. If it does, go from there with the tracing of wires. |
|
|
|
| Elliot Cannon |
May 29 2011, 09:13 AM
Post
#3
|
|
914 Guru Group: Retired Members Posts: 8,487 Joined: 29-December 06 From: Paso Robles Ca. (Central coast) Member No.: 7,407 Region Association: None 
|
QUOTE(SLITS @ May 29 2011, 08:05 AM)  Pumps do gum up or fail. Run hot wire to + terminal and another to ground and see if the pump will run at all as a test. If it does, go from there with the tracing of wires. I agree with Ron? (IMG:style_emoticons/default/agree.gif) I had the same problem with the Zonker. Twice!! Hot wired a spare battery to the pump and it DIDN'T run. Very quick trouble shooting. (I guess the old geezer DOES know what he's talking about). (IMG:style_emoticons/default/lol-2.gif) |
|
|
|
Posts in this topic
BCinSC Fuel Pump will not run May 29 2011, 08:42 AM
SLITS
Pumps do gum up or fail.
Run hot wire to + term... May 29 2011, 09:37 AM Elliot Cannon
[quote name='Elliot Cannon' post='1485200' date='... May 29 2011, 01:38 PM
BCinSC Is that Gumby with a Blunt? Anyway, I think you a... May 29 2011, 09:12 AM Tom Bruce,
Just went thru this yesterday with anot... May 29 2011, 09:12 AM BCinSC Argh. Swapped pumps and same deal. Could FI Brai... May 29 2011, 10:11 AM SLITS
Argh. Swapped pumps and same deal. Could FI Bra... May 29 2011, 10:16 AM BCinSC I don't get it. I have 12V at Pin30 of Relay.... May 29 2011, 10:26 AM BCinSC Mess with it long enough, and miraculously, it wil... May 29 2011, 10:34 AM Tom The relays sometimes don't fit tight in the so... May 29 2011, 10:51 AM BCinSC Not quite the contortionist I used to be. Can... May 29 2011, 12:09 PM BCinSC Hooked up known good spark plug to wire #1 and cra... May 29 2011, 12:17 PM benalishhero No spark? Are you running points and condensor? May 29 2011, 01:03 PM BCinSC Yes. Both relatively new (couple thousand miles a... May 29 2011, 01:34 PM BCinSC I reiterate that I was doing 60+ on the highway wh... May 29 2011, 01:36 PM Elliot Cannon I just had a crap load of electrical problems with... May 29 2011, 01:42 PM BCinSC Checked points more closely and found that the met... May 29 2011, 02:59 PM djm914-6 Sounds like you're having fun. WHo's watch... May 29 2011, 03:08 PM BCinSC Kids in Maine. 3 dogs in kennel. Other 4 milling... May 29 2011, 06:36 PM djm914-6 That's odd.... was the registry open today? May 29 2011, 06:57 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 05:29 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.