Calling the Subagurus, using the stock subaru AC in a 914 conversion? Options

[FourBlades]

I really like the subaru conversions being done here lately.

Got me wondering how hard it would be to adapt the subaru AC components to a 914.

I realize that new barrier hoses will be needed because of the length.

The ac console may not fit either.

Where does the AC compressor sit on the motor and would it fit in the 914 engine bay?

Thanks,

John

[willamp]

Check out Gilmore Enterprises in Florida. They do complete systems for vintage VW's and have developed one for the 914. There's no info about the 914 one on their website so you would need to call. I spoke with them at a show and Ed mentioned that you do not need to cut the cernter console short. Their evaporator housing goes past it in front of it and continues with air outlets on the drivers side. I was told system cost was in the $1600 range, so lower than some others. Their system installs similar to the original dealer systems so it can be fit to cars that either did or did not have the original dealer systems. Uses a modern rotary compressor and r134.

I have no real experience with the system, just am keeping it in mind if I add air.

http://www.gilmore-enterprises.net