![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
RiqueMar |
![]()
Post
#1
|
Enrique Allen Mar ![]() ![]() ![]() ![]() Group: Members Posts: 2,220 Joined: 28-August 08 From: San Diego, CA Member No.: 9,478 Region Association: Southern California ![]() ![]() |
I'm in desperate need of help with this CDI wiring on my conversion. The wiring I pulled off the 77' is just in horrible condition, as you will see in the pictures below, and I wouldn't be surprised if the wires are colored wrong or spliced wrong.
I'm not sure where each of the leads go, and I can't seem to find anything on an assortment of diagrams. (IMG:http://www.914world.com/bbs2/uploads_offsite/i16.photobucket.com-9478-1313108475.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i16.photobucket.com-9478-1313108475.2.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i16.photobucket.com-9478-1313108476.3.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/i16.photobucket.com-9478-1313108476.4.jpg) |
![]() ![]() |
SLITS |
![]()
Post
#2
|
"This Utah shit is HARSH!" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None ![]() ![]() |
Four wire to a 3 pin CDI box. Look at the end of the box ... terminals are labeled "A", "B" & "C"
"A" = to Terminal 15 on transformer (not an effin' coil). "B" = Switched power B+ "C" = Tach input & trigger wire from points Last wire CDI case to ground (spade terminal) |
RiqueMar |
![]()
Post
#3
|
Enrique Allen Mar ![]() ![]() ![]() ![]() Group: Members Posts: 2,220 Joined: 28-August 08 From: San Diego, CA Member No.: 9,478 Region Association: Southern California ![]() ![]() |
Four wire to a 3 pin CDI box. Look at the end of the box ... terminals are labeled "A", "B" & "C" "A" = to Terminal 15 on transformer (not an effin' coil). "B" = Switched power B+ "C" = Tach input & trigger wire from points Last wire CDI case to ground (spade terminal) Is this the part where you slap me in the back of the head and say, 'Don't make me have to tell you again, kid" Thanks Ron! |
SLITS |
![]()
Post
#4
|
"This Utah shit is HARSH!" ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Benefactors Posts: 13,602 Joined: 22-February 04 From: SoCal Mountains ... Member No.: 1,696 Region Association: None ![]() ![]() |
Four wire to a 3 pin CDI box. Look at the end of the box ... terminals are labeled "A", "B" & "C" "A" = to Terminal 15 on transformer (not an effin' coil). "B" = Switched power B+ "C" = Tach input & trigger wire from points Last wire CDI case to ground (spade terminal) Is this the part where you slap me in the back of the head and say, 'Don't make me have to tell you again, kid" Thanks Ron! I was thinking more of a kick and not in the back of the head. The connector in your pic had a mate and probably is the tach wire / B+ if there are 2 wires. Long harness went to transformer / dizzy (other side of transformer goes to ground - Terminal 1). Lonely wire is the ground on the CDI case. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 20th April 2025 - 06:42 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |