 Head temp differences, How big is too big? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| lapuwali |
 Apr 29 2004, 12:59 PM
Post
#1
|
|
Not another one!  Group: Benefactors Posts: 4,526 Joined: 1-March 04 From: San Mateo, CA Member No.: 1,743   |
I recently fit a CHT gauge, and originally put the sender under the #4 plug. Readings were in line with what I've read here: idled at 300dF, cruised at 325-350dF, touched 400dF under heavy load (lots of long uphill grades here).
I moved the sender to the #1 plug yesterday, and the temps are as much as 50dF lower across the board. Idles at 250dF, cruise about 300dF, never exceeds 350dF even pulling up a long hill. I expected a difference, but not 50dF (20%!) between heads. I'm running Webers, so it's possible I have completely different mixtures for each cylinder. I presume cooler head temps would usually mean richer? This would be in line with plug colors (blacker on the 1/2 head, tanner on the 3/4 head). Hmmm.... |
   |
 
|
  |
Replies
| lapuwali |
Apr 29 2004, 04:26 PM
Post
#2
|
|
Not another one! Group: Benefactors Posts: 4,526 Joined: 1-March 04 From: San Mateo, CA Member No.: 1,743 |
Wait a minute. Is a 50dF difference "typical" or "radical". It can't be both!
|
|
|
|
Posts in this topic
lapuwali Head temp differences Apr 29 2004, 12:59 PM
Jake Raby Absolutely...
50 degrees from the 1-2 bank to the... Apr 29 2004, 03:23 PM jkeyzer Not long ago I installed cooling flaps on my 1.7. ... Apr 29 2004, 03:45 PM dmenche914 I'll be getting head temp senders on mine, all... Apr 29 2004, 03:56 PM Jake Raby The replacement shroud is a 100% knockoff of a sto... Apr 29 2004, 04:12 PM jkeyzer It can be typical and still be bad for making powe... Apr 29 2004, 04:45 PM Jake Raby I'm saying that a 50 degre difference is typic... Apr 29 2004, 05:11 PM tracks914 50*F from front to back is OK (1-2 and 3-4)
But 30... Apr 29 2004, 05:14 PM Jake Raby Bank to bank... meaning:
cylinders 1-2 are a pair... Apr 29 2004, 06:08 PM Dave_Darling So you're actually going to make another new c... Apr 29 2004, 06:27 PM Jake Raby Yes, the mold is being made now... It loks 100%fac... Apr 29 2004, 09:02 PM dmenche914 goodness sake jake (hey that rhymes) You are doin... Apr 30 2004, 12:09 AM Jake Raby ALL the cooling results from the TIV and TI test w... Apr 30 2004, 06:45 AM lapuwali There were several holes left in the tin from the ... Apr 30 2004, 12:30 PM
dmenche914 yes, all the correct seals on the holes are import... Apr 30 2004, 10:47 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 26th December 2024 - 05:19 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.