Pissed off: Alignment got screwed i believe, nned to talk to someone knowledgeable. Options

[Aaron Cox]

ok... so my car has a new 911 front end. M calipers *new* turbo tie rods *new* ball joints etc. everything is NEW. i need to get it aligned.

go to a place that does JUST alignment and BRAKES. so here goes.

I gave him the specs of what i wanted (previous alignmnet thread) camber caster and toe.

he does the toe to 1/16th like spec's. says he cant do camber (something about raising one side, thinks he knows how the torsion bar system works [he doesnt] and and cant do caster too. says because car is lowered) . the car is running stock tires and is BARELY lowered up front.

I believe he misadjusted the turbo tie rods. (he unscrewed them from the rack i believe and used the lock nut to hold the length. dont you have to take off the cotter pin, pop out the tierod end, and rotate the whole tie rod end? you cant unscrew the rack end can you?

i pointed out to the where you adjust camber and caster (opened hood and ponted to the tops of the strut on the fender well!!!) so i have uneven left to right camber and caster, he didnt even do that.

i got charged 25.00 for toe in adjustment.

im gonna go yell at him and get my money back, if im right about how he adjusted the turbo tie rods.

please respond ASAP so i can get back to this idiot!

[Aaron Cox]

edit: ok...i looked at a picture of turbo tie rods and the adjustment he did was fine. but my steering wheel is way off center (35 degrees). and im mad that he didnt do camber or caster! anyone in socal know of a good alignment place?