Elden MK.10 Formula Ford, Resto/rebuild thread Options

['73-914kid]

I know it's not Porsche content, but I figured some of you guys would be interested in seeing the car as it undergoes a down to frame rebuild.

A week ago my dad and I went ahead and purchased a Formula Ford, something we both had talked about doing for getting myself involved in racing. My dad got his start in Formula Fords, so we thought it would be fitting I do the same. We stumbled on this car locally, so it was convenient for us to get it instead of trying to go out of state. It is a 1974 Elden MK.10, one of the last Mk.10's imported from England by Carl Haas. (like pretty much every english racecar it seems)

Overall the car is in pretty good shape, but being me, I didn't trust the preparation of the car, and we noticed some cracked brazing, so down to bare frame it comes to fix things that need to be fixed, and do things our way.

Here's the starting pictures, the morning after we picked it up:
(IMG:http://www.914world.com/bbs2/uploads_offsite/i260.photobucket.com-9714-1347406292.1.jpg)
Today's project has been removing the suspension and bodywork all around the car To prepare for removing the aluminum skin and other parts. I must say, there is an odd vibe with this car, where there's so much to do, you don't know what to do first. I've come to the conclusion that since everything needs to come apart, a list will help keep things sane. So far, all but the front left corner have been removed, bagged, and tagged.
(IMG:http://www.914world.com/bbs2/uploads_offsite/i260.photobucket.com-9714-1347406292.2.jpg)


More to come tomorrow, which hopefully will involve engine/gearbox removal.

[Downunderman]

Having just been through this with a smallish CanAm type car locally, are you planning on getting all the drilled out rivet heads out of the frame tubes and welding up all the rivet holes, squaring up the frame and then re-drilling it for the tin ware? Grit blasting after the rivet holes are welded up saves a lot of messing around getting the grit out of the frame tubes.