2.0l fuel injected engine surge starve cycle? Options

[jdlmodelt]

I finally got the ignition and fuel pump hooked up on my 76 2.0 L and the engine cycles between reving and stalling when I hold the pedal down to get a fast idle. What do I need to be checking now?

[tod914]

Do you have your oil pressure switch plugged in? It's just right (passanger side) of the distributor by about an inch or so. Theres a hole in the engine tin you'll see. You may or may not have the rubber boot on it. Actually that's the green with red stripes on that.

Check your email and foward me an email if you can. I want to email you a diagram that should help sort out all your wiring issues.

Quick side note, if you very carefully slide the sheath/rubber boots up the wires, you can see that each wire has a specific number stenciled on it. It will correlate to the number on your sensor in most cases. That will help you figure out which way your plug goes into your MPS. Those numbers are on the plastic that you match to. It should only go in one way, but maybe your wire connector was changed some where down the line.