FS 914-6 Concours, 1970 real deal six Options

[toolguy]

22,453 miles on car, 317 miles since professional rotisserie restoration in 2011-2012 {fully documented}. Driven only for PCA shows / events and to sort out engine and trans. . . Consistent Concour 1st place class winner in 2012, last Zone 8 PCA show scored 324 out of 325 points. Highest standards, a no excuse vehicle. All number match, fresh engine and trans broken in and sorted out. Currently ready to compete in this years Concour series.

Every level of detail was addressed, down to OE seat belt labels and steering rack dissemble.. Originality was my goal, and the car shows it. My intentions were to show it in PCA Concours and be a reliable driver after a few years of shows. The original 2.0 engine was seeping, so it was split, and the case halves surfaced and line bored. Total rebuild with E cams added, all new main and rod bearings, chains and tensioners, rings and a full valve job including new guides. All rotating parts balanced to within 1 gram/. . .The trans was pulled apart for inspection, has all new syncros, and resealed. . Correct 14 x 5.5 inch Fuchs, spare rim looks like it has never been used.

Non stock items. . . . I wanted the car to also be fun driver so I put an SC suspension with 3.5 brakes on the front, with a 20mm front sway bar and a stock rear sway bar. . Konis in front with 19 mm torsion bars and Bilsteins in the rear with 160 pound springs. It handles exceptionally well with good balance front to rear. . . {I do have the OE Six suspension with 3 inch brakes restored and preserved.} Currently has an LE front spoiler and short real valance. . . Other than those items, I kept it visually as manufactured / delivered. Includes the Six toolkit, original owners manual in unused perfect condition and the OE passenger footrest. . . Original Blaupunkt works perfectly. Also has 911S 40IDA Webbers and Sport Muffler. Runs very well with the E cams. It does have a 1970's Dealer optional Nardi wheel, and I do have the OEM Six wheel. Same with the Factory Six air cleaner and Euro lens.

Price. . . . . Please consider I've got right at $60k in it plus over 1600 hours professional restoration labor [13 months labor] to make this a very nice car, certainly one that would be hard to duplicate to this level of Concour preparation. I'm asking $92 and will consider qualified cash offers consistent with my expense and time. Located in San Diego since new.

[Nine_14]

Great /6 looks like rolling out of the factory just yesterday..... Congra (IMG:style_emoticons/default/smile.gif)