 Chassis Stiffening - which kit? Cage?, Stiffening before paint, need help. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| corpselaurel |
 Jul 4 2004, 10:12 AM
Post
#1
|
|
Member  Group: Members Posts: 90 Joined: 15-April 04 From: usa Member No.: 1,931  |
I have been reading and searching. So far I have eliminated the boxed trailing arms.
I want to stiffen the car up before I paint. What 'kit(s)' should I install? I have read read that most of the pieces in the chassis stiffening kit are useless. Should I buy the kit and install the others? I have also read that engman's kit helps a lot. And I was also considering the Inner Rocker Panel Frame Stiffeners. I just don't know which combination I should install. Should I use all of them or do some cancel each other out (for lack of better wording). Post links to suppliers if you mention any. I am open to the idea of putting a cage in but it has to be in kit form. Does anyone sell one and would I still need any of the stiffening mentioned above with a cage? The car is not badly rusted except for the battery tray and underneath - completly gone. I will be repairing it. My plans for the car are daily driver with some autox. Next year I will swap in a more powerfull engine. Thanks for any help. |
   |
 
|
  |
Replies
| corpselaurel |
Jul 4 2004, 07:59 PM
Post
#2
|
|
Member Group: Members Posts: 90 Joined: 15-April 04 From: usa Member No.: 1,931 |
After doing some more reading I haver decided to install the clam shells, the inner longs, and the 10 piece kit pictured. (I really wish someone would call out the pieces that I hear are useless in the 10 piece kit, I don't want dead weight. I even numbered them!)
My main concern is with the rear shock towers. I have read that with high spring rates (~300# I believe) they start to separate over time. There doesn't seem to be any kit to fix this that I am aware of. (Please let me know if there is, or if someone does it) So I will wait to tackle that problem until next year when I hope to have a cage put in that ties to the rear shock tower. This page has been very informative. I will go ahead and do the welding, and por15 everything. And when I am ready to install the cage I will remove the por15 where I need to weld I guess. I will not be doing the boxed trailing arm kit. I read in a few posts on hear that for various reasons convinced me. Which ones are useless?! |
|
|
|
Posts in this topic
corpselaurel Chassis Stiffening - which kit? Cage? Jul 4 2004, 10:12 AM
trekkor I recommend Engman's highly.
Nice thing is you... Jul 4 2004, 10:25 AM neo914-6 QUOTE
corpselaurel Here is a pic of the kit from pelican. Which piec... Jul 4 2004, 10:54 AM trekkor Believe me I want to. I have over 50 shots of the ... Jul 4 2004, 11:02 AM trekkor My understanding is this: if you box stiffen the t... Jul 4 2004, 11:11 AM corpselaurel trekkor Come to the Napa 914 lunch July 19 and see/feel th... Jul 4 2004, 11:55 AM corpselaurel I would but it is way to far from me. It is in AZ... Jul 4 2004, 12:14 PM i love porsche so the trailing arm stiffeners are a bad idea? Jul 4 2004, 03:49 PM trekkor My understanding is the load get's transfered ... Jul 4 2004, 05:14 PM Eric_Shea I have them (boxed control arms)... I don't th... Jul 4 2004, 07:27 PM Eric_Shea I believe it's 6 and 7 but not certain.
It ... Jul 4 2004, 09:09 PM 9146986 ... Jul 5 2004, 08:07 AM Jeroen If you're planning to put a cage in your car, ... Jul 5 2004, 08:26 AM Brett W In my opinion 3 and 8 are fairly useless, but I th... Jul 5 2004, 08:53 AM Eric_Shea :agree: with Ya-Roon
If you're going cage th... Jul 5 2004, 10:28 AM RAR Qarl Has anyone bought and installed an off-the-the she... Jul 5 2004, 12:43 PM RAR Speaking of rollbars, is the biggest benefit of sa... Jul 5 2004, 12:51 PM Jeroen Here's some good reading...
http://www.914wor... Jul 5 2004, 02:53 PM Jeroen More...
http://www.914world.com/bbs2/index.php?ac... Jul 5 2004, 02:57 PM corpselaurel I read a thread the other day which had a few diag... Jul 7 2004, 03:30 PM corpselaurel Does anyone have instructions or a diagram for the... Jul 7 2004, 03:40 PM Jeroen If this is a street / AX car, don't get a full... Jul 7 2004, 03:47 PM corpselaurel Safety isn't my concern, I just thought you ha... Jul 7 2004, 03:57 PM Rob Ways Would the interior weld-in kit work well with a we... Jul 7 2004, 07:49 PM Jeroen Hey Rob,
You have a "petty" bar on your rollbar, ... Jul 7 2004, 08:04 PM Jeroen QUOTE
TimT QUOTE
corpselaurel I think I will pass on all of the kits and do some... Jul 9 2004, 07:34 PM Rob Ways I have a weld in bar (tied into the rear longs and... Jul 9 2004, 07:55 PM Aaron Cox rob, can you post a pic of your roll bar please ;) Jul 9 2004, 08:03 PM Rob Ways OK- This first pict is the pass long tie. Note the... Jul 9 2004, 08:25 PM Rob Ways Here's a pict of all the upper points. The fro... Jul 9 2004, 08:27 PM Rob Ways This pict is the front pickup point welded into th... Jul 9 2004, 08:29 PM Rob Ways Here's the driver's side. Note the positio... Jul 9 2004, 08:31 PM Rob Ways Here's a closer look at the drivers side point... Jul 9 2004, 08:33 PM Rob Ways I just had to post this one again. Jul 9 2004, 08:34 PM Aaron Cox can you still fit a passenger? Jul 9 2004, 08:49 PM trekkor I'll say this about chasis stiffening coupled ... Jul 9 2004, 09:52 PM Rob Ways Passengers fit OK, but its at least 3 inches forwa... Jul 9 2004, 11:37 PM trekkor Koni yellows- full soft front, full firm rear
31mm... Jul 9 2004, 11:56 PM Rob Ways Why soften the front? What torsion bars? Who told ... Jul 10 2004, 12:01 AM Rob Ways This is what it should look like..... Jul 10 2004, 12:07 AM trekkor I am the experimental child.
I believe the soft h... Jul 10 2004, 12:18 AM trekkor Here's the car with the long lift.
Don't h... Jul 10 2004, 12:29 AM trekkor point of reference:
here's what it looks like... Jul 10 2004, 12:40 AM Rob Ways I shouldn't drive and tell... but the rear bar... Jul 10 2004, 12:43 AM Rob Ways Oh, the Jagermeister car is N/A IMO Jul 10 2004, 12:43 AM Rob Ways I dig the last picture and how you are leaning you... Jul 10 2004, 12:45 AM Rob Ways I know this sounds crazy too, but I think the roll... Jul 10 2004, 12:49 AM trekkor Come to Alameda, Rob.
I have not run the stiff ki... Jul 10 2004, 01:08 AM Rob Ways Thanks for the offer.
I've got kid duty but ... Jul 10 2004, 01:15 AM trekkor Rob, I was putting new wheels on today and when I ... Jul 10 2004, 01:22 AM Rob Ways The latteral stiffness is there with my forward ba... Jul 10 2004, 01:38 AM trekkor The first thing Brad noticed about my car when it ... Jul 10 2004, 01:48 AM 914momo I've been using a propane torch and a wood chi... Jul 10 2004, 01:53 AM
Racer Chris IMO the Engman kit is ony good because of the easy... Jul 10 2004, 05:56 AM |
20 User(s) are reading this topic (20 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 06:06 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.