Rear brakes and e-brake... Options

[edhall]

Hi guys, just joined as I've just got a 914. Need a little help with parts compatibility and wondered if anyone could help?

Car is a 74 914 with a 3.2 Carrera engine, 901 trans, and it stops with 911 SC vented rotors and calipers all round. Thing is, it doesn't have an emergency brake. The car was built in California but here in the uk it cannot be road legal without one.

Do I go 911 style drum in disc or 914 style ebrake on a calipers?

Thanks in advance

[Eric_Shea]

For all of the money and time you would spend fitting a 911 handbrake solution you could go with a proper factory solution and bolt up factory handbrake cables for less money and less hassles. I know because I do both. I've built probably 12 complete suspensions using 911 components.

This is, in fact, why we went forward developing the VB914-6 and VB914-6/GT calipers. It's now cheaper to do it right:

If you're a stickler for originality, I have 3 pair of stock 914-6 calipers available @ $1,200.00 per pair:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.pmbperformance.citymax.com-1110-1376586924.1.jpg)

We also have the VB914-6 alloy calipers as mentioned above @ $799.00 per pair:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.pmbperformance.citymax.com-1110-1376586924.2.JPG)

The 914-6/GT versions would bolt up to your rear vented rotors for $899.00 per pair:
(IMG:http://www.914world.com/bbs2/uploads_offsite/www.pmbperformance.citymax.com-1110-1376586927.3.JPG)

All of these have the same 38mm piston size and the same FSMI D31 pad size your 911 rear calipers have.

[worn]

For all of the money and time you would spend fitting a 911 handbrake solution you could go with a proper factory solution and bolt up factory handbrake cables for less money and less hassles. I know because I do both. I've built probably 12 complete suspensions using 911 components.

This is, in fact, why we went forward developing the VB914-6 and VB914-6/GT calipers. It's now cheaper to do it right:

All of these have the same 38mm piston size and the same FSMI D31 pad size your 911 rear calipers have.

Hi Eric,
I have the 911 SC brake parts in hand and can handle the parking brake conversion. Would you comment on the differences between those vented brakes and the reproduction 914-6 brakes? I know what I have because I also have a 911SC, but I don't have familiarity with the original 914-6 because I am making it from a 914-4 as a starting point.
Thanks, and also thanks for doing all this stuff for us. Do you get to pour the metal?