 Rear brakes and e-brake... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| edhall |
 Aug 15 2013, 12:02 AM
Post
#1
|
|
Newbie  Group: Members Posts: 2 Joined: 14-August 13 From: Uk Member No.: 16,254 Region Association: None  |
Hi guys, just joined as I've just got a 914. Need a little help with parts compatibility and wondered if anyone could help?
Car is a 74 914 with a 3.2 Carrera engine, 901 trans, and it stops with 911 SC vented rotors and calipers all round. Thing is, it doesn't have an emergency brake. The car was built in California but here in the uk it cannot be road legal without one. Do I go 911 style drum in disc or 914 style ebrake on a calipers? Thanks in advance |
   |
 
|
  |
Replies
| ChrisFoley |
Aug 19 2013, 09:12 AM
Post
#2
|
|
I am Tangerine Racing Group: Members Posts: 7,968 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None 
|
I have some SC brake tophats available. They fit over my aluminum bearing retainers, as opposed to early tophats going under the retainers.
I don't think the tophats alone are suitable as bearing retainers. The rest of the 911 parking brake parts are the same IIRC. The trailing arms need some relieving in the corners. The tophats need the lips ground down and the bolt holes ovalled. |
|
|
|
Posts in this topic
edhall Rear brakes and e-brake... Aug 15 2013, 12:02 AM
type47 I'd say get some 914 rear brakes from Eric She... Aug 15 2013, 05:44 AM
Racer Chris
... not have to engineer the pull mechanism ...
T... Aug 15 2013, 08:36 AM andys
... not have to engineer the pull mechanism ...
... Aug 15 2013, 12:25 PM Racer Chris
Chris,
On your cable adapter, do you remove one ... Aug 15 2013, 12:41 PM jimkelly eric's site
http://www.pmbperformance.com/914... Aug 15 2013, 06:23 AM mepstein PMB sells a 914-6 rear brake replica in aluminum t... Aug 15 2013, 06:25 AM chad newton
PMB sells a 914-6 rear brake replica in aluminum ... Aug 18 2013, 10:17 PM aharder :wttc: Aug 15 2013, 07:00 AM green914 :wttc: Aug 15 2013, 09:14 AM Eric_Shea For all of the money and time you would spend fitt... Aug 15 2013, 11:15 AM Racer Chris
This is, in fact, why we went forward developing ... Aug 15 2013, 11:40 AM worn
For all of the money and time you would spend fit... Aug 15 2013, 01:33 PM Eric_Shea
For all of the money and time you would spend fi... Aug 15 2013, 07:58 PM worn
SC parts will be even more difficult to fit. The... Aug 16 2013, 11:39 AM 914_teener
SC parts will be even more difficult to fit. Th... Aug 16 2013, 12:05 PM worn
:shades2:
Well, yeah you are right. But he... Aug 16 2013, 12:34 PM Trekkor http://www.rockauto.com/ has several options.
91... Aug 15 2013, 01:23 PM Eric_Shea You'll have to read up on that. there's a... Aug 15 2013, 01:26 PM Trekkor http://www.oreillyauto.com/site/c/search/B...tkeyw... Aug 15 2013, 01:33 PM Cap'n Krusty
[url=http://www.oreillyauto.com/site/c/search/Bra... Aug 15 2013, 02:57 PM Trekkor
To all those using brake parts sourced from Roc... Aug 15 2013, 07:31 PM DBCooper
To all those using brake parts sourced from Ro... Aug 16 2013, 09:49 AM worn
[url=http://www.oreillyauto.com/site/c/search/Br... Aug 16 2013, 11:34 AM Cap'n Krusty
Hi guys, just joined as I've just got a 914. ... Aug 15 2013, 02:59 PM r_towle Mid 90's vw passat looks like it may work on v... Aug 15 2013, 08:01 PM jcd914
Mid 90's vw passat looks like it may work on ... Aug 15 2013, 09:57 PM Elliot Cannon I have PMB's alloy 914/6 calipers on my car. ... Aug 15 2013, 10:58 PM Socalandy PMB 914-6GT calipers on my ride with Stock E-brake... Aug 15 2013, 11:26 PM edhall This is all great stuff. Thanks! I'll spen... Aug 16 2013, 06:11 AM monkeyboy When I first picked up my 914 years ago, the manag... Aug 16 2013, 11:28 AM Trekkor http://www.cardone.com/products/brakes
I trust th... Aug 16 2013, 01:52 PM Trekkor Front:
https://sphotos-a.xx.fbcdn.net/hphotos-prn... Aug 16 2013, 02:20 PM Eric_Shea
Lets see if we can get this quote thing right...... Aug 16 2013, 02:58 PM worn
The SC front would work. If it's for street ... Aug 16 2013, 08:58 PM Eric_Shea I like S-Calipers. But they're expensive. Othe... Aug 16 2013, 10:20 PM Racer Chris
... stay with a 3" strut an go Brembo. At 4l... Aug 17 2013, 07:38 AM Steve Eric's solution is the way to go. IMHO, to go... Aug 18 2013, 09:57 AM Racer Chris
Eric's solution is the way to go. IMHO, to g... Aug 18 2013, 10:18 AM Jeff Hail
Eric's solution is the way to go. IMHO, to g... Aug 18 2013, 12:57 PM Steve I agree and if someone wanted to go down the 911 e... Aug 18 2013, 11:09 AM Steve :agree:
Wes did all that work on my trailing arms... Aug 18 2013, 01:11 PM Eric_Shea Here's my take; many think I'm a big brake... Aug 18 2013, 01:33 PM Jeff Hail
Here's my take; many think I'm a big brak... Aug 18 2013, 01:55 PM Racer Chris
...
I simply don't think enormous brakes are ... Aug 18 2013, 04:40 PM Eric_Shea I decided to go with the stock solution and sold t... Aug 18 2013, 02:02 PM Jeff Hail
I decided to go with the stock solution and sold ... Aug 18 2013, 03:07 PM worn
I decided to go with the stock solution and sold ... Aug 19 2013, 05:12 PM jaxdream
I decided to go with the stock solution and sold... Aug 19 2013, 07:16 PM Racer Chris
You will have to fashion a 40mm or so bracket wel... Aug 19 2013, 09:40 PM Steve I am also running stock Boxster brakes up front. ... Aug 18 2013, 03:07 PM Eric_Shea Read post #8 in this thread. (or post #22... or po... Aug 18 2013, 10:19 PM chad newton
Read post #8 in this thread. (or post #22... or p... Aug 18 2013, 10:52 PM TurboWalt I currently have the Renegade "Big Red" ... Aug 19 2013, 06:15 AM Eric_Shea
I currently have the Renegade "Big Red... Aug 19 2013, 07:38 AM Jeff Hail Shave the shiny areas until the hat/ backing plate... Aug 19 2013, 06:09 PM Jeff Hail First pic to give an idea what the 11 arm looks li... Aug 19 2013, 07:57 PM jaxdream
First pic to give an idea what the 11 arm looks l... Aug 20 2013, 07:46 AM brant Now I'm curious eric.
What is the front to r... Aug 19 2013, 09:56 PM DBCooper I haven't been to your site in a while, Chris,... Aug 19 2013, 09:57 PM Racer Chris
I haven't been to your site in a while, Chris... Aug 20 2013, 11:50 AM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th December 2024 - 03:52 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.