Seeking picture or diagram, Upper oil tank hose to cooler. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Seeking picture or diagram, Upper oil tank hose to cooler. |
914itis |
Oct 1 2013, 06:33 AM
Post
#1
|
Advanced Member Group: Members Posts: 2,892 Joined: 9-October 10 From: New York City Member No.: 12,256 Region Association: North East States |
I am looking for a picture or diagram on how to route the aftermarket oil line from the engine block to the tank. The output for the tank is above the Tins and the one for the motor is under. How do I bring it down from the tank? Tank is at stock location.
Thanks Paul |
Jeffs9146 |
Oct 1 2013, 06:50 AM
Post
#2
|
Ski Bum Group: Members Posts: 4,062 Joined: 10-January 03 From: Discovery Bay, Ca Member No.: 128 |
I am looking for a picture or diagram on how to route the aftermarket oil line from the engine block to the tank. The output for the tank is above the Tins and the one for the motor is under. How do I bring it down from the tank? Tank is at stock location. Thanks Paul You need to drill a hole in the engine shelf and run it under the front of the engine along the fire wall and to the side of the engine! You can not use the factory hard 6 oil line with that front engine mount so you need to make one! I don't know if you can see it in this photo!! Attached image(s) |
914itis |
Oct 1 2013, 06:54 AM
Post
#3
|
Advanced Member Group: Members Posts: 2,892 Joined: 9-October 10 From: New York City Member No.: 12,256 Region Association: North East States |
I am looking for a picture or diagram on how to route the aftermarket oil line from the engine block to the tank. The output for the tank is above the Tins and the one for the motor is under. How do I bring it down from the tank? Tank is at stock location. Thanks Paul You need to drill a hole in the engine shelf and run it under the front of the engine along the fire wall and to the side of the engine! You can not use the factory hard 6 oil line with that front engine mount so you need to make one! I don't know if you can see it in this photo!! Thanks Jeff that's what I needed to know, I already have the aftermarket oil lines made by Patrick motorsports. |
Lo-Fi Version | Time is now: 26th June 2024 - 03:10 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |