recent Sebring Abuse, Oil system help Options

[Jetsetsurfshop]

Hey Everyone (IMG:style_emoticons/default/biggrin.gif)
Here's what I'm running
2258cc
10.5 to 1 compression
40 webers
494 web cam
type 1 oil pump
mocal oil cooler 25 row
mocal sandwich w/thermostat adapter
accusump 2 quart
Brad Penn Air-cooled oil 15-50 (5 1/2 quarts)

Let me explain my set-up
The oil cooler is a rear mount under the car on the passenger side rear. I made some duct work and its almost vertical to catch the most air as possible.
Track conditions
Sunny, low 80s, 30min sessions

question 1) With that cooler I didn't expect to run in the 230f oil temps. Is 230f acceptable?
question 2) I also have some oil on the top of the case /engine tin pooling. 1-2 side.
It only happens under WOT. Any ideas?
question 3) I never set-up an accusump and I don't like it so far.
It over fills the case at shut-off. Do I have to much air in it (9lbs)?
Other then my oil questions, I had a great time. Ran a 2:51. My new best time.
(IMG:style_emoticons/default/smilie_pokal.gif)

[brant]

I think the fan will help too

although some say at speed the fan becomes intrusive and a partial blockage to full frontal air (if you have full frontal air)

I would build a scoop on that to pull in clean air from under the car. That would add some aero drag but the trade off being enough air flow to cool better

no matter what you need to add some screen to that cooler to protect it from rocks and garbage