DAPO Pictures, Things that make you go hummmmm!!!!!! Options

[914Sixer]

I bought a z-green 74 and am in the process of sorting it out to run. I am replacing everything that is missing and not correct. I started sorting out the fuel injection and found the fuel pump moved to the front of the car with a piece of zip cord run through the tunnel from the rear to power the pump. All of this was mounted on the front suspension pan cover.

Wonder why this door rotted out? It is completely covered with 1/2 " carpet pad. Every surface had pad glued down including the bottom of the door where the drain holes were. Both door were done like this. Back wall had same carpet pad behind the molded wall.

[euro911]

I found out why the 'BB's left headlight didn't stay put very well. This must have happened way out in the boonies, or before the magical world of internet shopping and 914 forums (IMG:style_emoticons/default/confused24.gif)




This was in the mid section of 'BB' - attached with 26 rivets, for the tail-shift transmission's shift rod (IMG:style_emoticons/default/blink.gif) ... mind you, the 'BB' is a 1975 (IMG:style_emoticons/default/slap.gif)




Here's what I found when I removed it




No pix, but it also had late rubber mounts on the engine brackets PLUS early rubber mounts on the outboard ends of the mounting bar (IMG:style_emoticons/default/screwy.gif)


... and the battery tray. Not shown is the bungee cord that held the battery in place (IMG:style_emoticons/default/sad.gif)



Oh, and the foil tape hell hole patch (IMG:style_emoticons/default/shades.gif)

All of this has been corrected (IMG:style_emoticons/default/mueba.gif)