recent Sebring Abuse, Oil system help Options

[Jetsetsurfshop]

Hey Everyone (IMG:style_emoticons/default/biggrin.gif)
Here's what I'm running
2258cc
10.5 to 1 compression
40 webers
494 web cam
type 1 oil pump
mocal oil cooler 25 row
mocal sandwich w/thermostat adapter
accusump 2 quart
Brad Penn Air-cooled oil 15-50 (5 1/2 quarts)

Let me explain my set-up
The oil cooler is a rear mount under the car on the passenger side rear. I made some duct work and its almost vertical to catch the most air as possible.
Track conditions
Sunny, low 80s, 30min sessions

question 1) With that cooler I didn't expect to run in the 230f oil temps. Is 230f acceptable?
question 2) I also have some oil on the top of the case /engine tin pooling. 1-2 side.
It only happens under WOT. Any ideas?
question 3) I never set-up an accusump and I don't like it so far.
It over fills the case at shut-off. Do I have to much air in it (9lbs)?
Other then my oil questions, I had a great time. Ran a 2:51. My new best time.
(IMG:style_emoticons/default/smilie_pokal.gif)

[Seabird]

I was under the impression that the tumbling air under the cylinder heads, caused by the plastic flaps, was important for head cooling. By adding this ducting here under the 3/4 bank are you not exacerbating the cooling challenges to cylinder 3?

I may not be getting a clear understanding of the layout from the pictures.

Miguel