Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Fuel Injectors
Bullet
post Aug 13 2004, 06:29 PM
Post #1


Member
**

Group: Members
Posts: 116
Joined: 16-April 04
From: Newberg, OR
Member No.: 1,940



I was Looking at buying a new set of injectors, And i was woundering what is the differance between the injectors for a 73-74 2.0 and a 75-76 2.0 at my cost i can get the 73-74 injectors at $44 each and the 75-76 for $108. I would like to know if i can use the 73-74 injectors on my 75 2.0?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Bruce Allert
post Aug 14 2004, 12:07 AM
Post #2


Hellions asleep
****

Group: Members
Posts: 3,289
Joined: 19-March 03
From: Eagle Creek, Orygun
Member No.: 441
Region Association: Pacific Northwest



QUOTE(Bullet @ Aug 13 2004, 06:47 PM)


The part # for the new injectors are ( 0 280 150 019 ) that is a Bosch #.


Yup, that's the same # my 74 injectors have along with a VW # of 039 906 031.

Have you traced all the wiring of the FI from the ECU to the various connections via an ohm meter?
Here's a list of the contacts from the ECU to the various wire ends. The connection into the ECU has a small area beside each wire terminal big enough to write a small number... I counted down and numbered each terminal. This helped to follow which end was which & kept me from getting it mixed up.

1. Temp Sensor I
2. Not used
3. #1 Injector
4. #4 Injector
5. #2 Injector
6. #3 Injector
7. Pressure sensor, primary winding
8. Pressure sensor, secondary winding
9. Throttle switch (full load signal)
10. Pressure sensor, secondary winding
11. Ground, engine
12. Trigger points, common
13. Temp sensor I
14. Not used
15. Pressure sensor, primary winding
16. 12V power (from relay board)
17. Throttle switch
18. Starter motor (terminal 50)
19. Fuel pump relay
20. Throttle switch
21. Trigger points
22. Trigger points
23. Temp sensor II
24. 12V power

.......b
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
Bullet   Fuel Injectors   Aug 13 2004, 06:29 PM
Bruce Allert   Hey Bullet, I don't know for sure but I don...   Aug 13 2004, 07:37 PM
Bullet   Yeah I didnt see a reason why they wouldnt work. ...   Aug 13 2004, 07:47 PM
lapuwali   Measure the resistance between the two pins in the...   Aug 13 2004, 08:08 PM
Bruce Allert     Aug 14 2004, 12:07 AM
Ray Warren     Aug 14 2004, 06:21 PM
Bullet     Aug 14 2004, 06:40 PM
Mark Henry   Group buy????!!!! I'll take a...   Aug 14 2004, 07:08 PM
Ray Warren   Probably would not be a good idea for Bullet to be...   Aug 14 2004, 07:31 PM
Bullet   you hit it right on the nose, Ray. I wish that i ...   Aug 14 2004, 08:50 PM
Bruce Allert   So Bullet, have ya done anymore sleuthing as to wh...   Aug 14 2004, 10:47 PM
Jeff Bowlsby  
QUOTE
  Aug 14 2004, 11:03 PM
Bullet  

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

- Lo-Fi Version Time is now: 31st October 2024 - 06:16 PM